Parts ordering notes
Part no. | Designation | Quantity |
A 670 553 01 16 | Parts kit 2 - Adaptation for B65 12 V and 24 V, left-hand steering | 1 |
Parts identified with an X below are included in this parts kit | ||
A 669 540 87 36 | X Waist rail wiring harness (left-hand steering) or | 1 |
A 669 540 88 36 | Waist rail wiring harness (right-hand steering) | 1 |
A 004 545 04 05 | X Relay (12 V) or | 1 |
A 003 545 96 05 | X Relay (24 V) | 1 |
A 006 545 44 26 | X Sockets | 2 |
N 072 581 000 304 | X 10A fuse | 1 |
1 Plug relay holder K48 into free mounting location behind electrical center
2 Connect relay K48 and K18, chamber 4 to blue cable fitted
Blue cable, D+ tapping, previously connected to relay K18, chamber 4.
If necessary, use new socket A 006 545 43 26 for wiring
3 Plug socket of black/yellow cable from relay K48, chamber 1 into white connector XF.B5, chamber 7
4 Screw terminal of brown cable to ground
The ground pin is located below the windshield wiper motor
5 Plug contact springs F49.1 and F49.2 of fuse F49 into the free location of the auxiliary fuse block
F49.1, black
F49.2, black/red
F49, compressed-air drier heater
6 Insert 10 A fuse
10 A fuse (N 072 581 000 304)
N42.20-2027-01
7 Plug in spring actuator X35 connector
X35, 1-pin white connector, 2 x black cables
8 Plug contact spring F39.1 into fuse holder of fuse F39
F39, compressor spring-loaded cylinder
F39.1, 4 mm2 and 1.5 mm2 black cable
9 Enter new fuse in the assignment plan on the fuse box cover
"F49 compressed-air drier heater, 10 A"