Parts ordering notes
Part no. | Designation | Quantity |
A 670 553 02 16 | Kit 3 - retrofit B65 12 V | |
A 670 553 03 16 | Kit 4 - retrofit B65 24 V | |
Parts kit 3 contains the parts marked with X1 below Parts kit 4 contains the parts marked with X2 below | ||
A 001 431 98 15 | X1 Compressed air dryer, heated (12 V) or | 1 |
A 001 431 97 15 | X2 Compressed air dryer, heated (24V) | 1 |
A 668 420 02 71 | X1/2 Safety valve assembly or | 1 |
A 668 420 03 71 | Safety valve assembly (only with wheelbase of 4800 and transmission G60 or automatic) and | 1 |
A 668 427 19 41 | Bracket (only with wheelbase of 4800 and transmission G60 or automatic) | 1 |
A 020 545 71 32 | X1 Time relay (12 V) or | 1 |
A 020 545 72 32 | X2 Time relay (24 V) | 1 |
N 007 981 004 325 | X1/2 Sheet metal screw for time relay bracket | 1 |
A 670 540 74 36 | X1/2 Dash support wiring harness (for time relay) | 1 |
A 669 540 54 36 | X1/2 Frame wiring harness (for all wheelbases) | 1 |
N 304 017 008 030 | X1/2 Hexagon bolts ISO M8x50 | 2 |
A 668 427 20 41 | X1/2 Bracket for safety valve | 1 |
N 000 000 000 932 | X1/2 Clamp for safety valve | 1 |
N 914 146 006 102 | X1/2 Hexagon bolt M6x16 | 1 |
N 913 023 006 001 | X1/2 Nut M6x8 | 1 |
N 000 908 022 001 | X1/2 Sealing plug M22x1.5 | 1 |
N 007 603 022 403 | X1/2 Sealing ring (for old safety valve opening) | 1 |
N 007 603 012 405 | X1/2 Sealing rings | 4 |
A 668 545 47 45 | X1/2 Pipeline (7.5 m, between dryer and distributor) If necessary, self-made from: 1 x Connector A 000 990 68 78, 1 x Right-angle plug A 002 990 28 71, 1 x Pipe bend A 655 990 06 71, Plastic pipe 12 x 1.5 m length 7.5 m A 000 987 28 27 | 1 |
A 000 997 08 34 | X1/2 Retaining screw (small) | 1 |
A 000 997 09 34 | X1/2 Retaining screw (large) | 1 |
A 000 994 00 47 | X1/2 Circlip (small) | 1 |
A 000 994 01 47 | X1/2 Circlip (large) | 1 |
A 000 994 12 48 | X1/2 Retaining clamp (small) | 1 |
A 000 994 14 48 | X1/2 Retaining clamp (large) | 1 |
A 005 997 89 72 | X1/2 Connecting piece | 1 |
A 006 997 30 90 | X1/2 Cable strap | 10 |
A 001 997 84 90 | X1/2 Cable strap | 20 |
N42.20-2019-01
1 Attaching compressed air dryer to compressor
A 001 431 98 15 or
A 001 431 97 15 compressed air dryer
N 304 017 008 030 Bolts M8x50
2.1 Attach left compressed air dryer to compressor using 2 bolts
Only with wheelbase 4800 in combination with transmission G60 or automatic transmission.
Higher installing because of distance to propeller shaft.
A 668 427 19 41 Bracket
N42.20-2025-01
3 Fit safety valve (1)
4 Unscrew plastic or metal pipe between compressor outlet and distributor
A 668 420 02 71 or
A 668 420 03 71 Safety valve assembly with RD 4800 + G60/automatic
N42.20-2024-01
5 Attach bracket (2) for safety valve, clamp (3), hexagon bolt M6x16 and nut M6x8
A 668 427 20 41 Safety valve holder
N 000 000 000 932 Clamp
M6x16 Hexagon bolt
N 913 023 006 001 Nut M6x8
6 Unscrew previously fitted safety valve at distributor, plug opening using sealing plug (B) and sealing ring.
A 000 908 022 001 Sealing plug
N 007 603 022 403 Sealing ring
N42.20-2020-01
7 Fit compressed air line
A668 420 47 45 Compressed air line
8 Attach straight end of compressed air line to distributor
Attach compressed air line to connection 1 of distributor using retaining bolt, circlip and retaining clamp.
A 000 997 08 34 Retaining bolt WAF 24
A 000 994 00 47 Circlip
A 000 994 14 48 Retaining clamp
N42.20-2036-05
9 Attach kinked end of compressed air line to dryer
Attach compressed air line to connection 21 of dryer using retaining bolt (WAF 19), circlip, retaining clamp and connection piece.
A 000 997 08 34 Retaining bolt WAF 19
A 000 994 00 47 Circlip
A 000 994 12 48 Retaining clamp
A 005 997 89 72 Connection piece
1 Dash support wiring harness
2 Compressor
3 Compressed air line
4 Frame wiring harness