German Armed Forces vehicles with code JMAB (Preparation for low-quality fuel package)
Exhaust aftertreatment, BlueTec®
Number
Designation
Engine 470.9, 471.9, 473.9
BA14.40-N-1015-02I
Pump module on bracket
Nm
60
1
Remove AdBlue® pump module (A80) from holder (1).
Do not disconnect electric line (3), AdBlue® lines (4) or coolant lines (2).
2
Remove previous holder (1) from frame.
W49.20-A206-81
3
Attach new holder (5) at frame.
Install new holder (5) offset by a row of holes in direction of travel and so that it points toward vehicle center.
4
Attach AdBlue® pump module (A80) at holder (5) .
All lines remain connected to AdBlue® pump module (A80).
W49.20-A207-81
5
Seal AdBlue® lines (7) of AdBlue® metering device remaining on vehicle after removal of exhaust gas aftertreatment unit using line pieces (8) and (10) as well as connection pieces (9).
W49.20-A208-81
6
Place line package on other side of vehicle and secure at AdBlue® container (11) or frame using cable ties.
Ensure that line package is securely fastened and routed free of tension.
7
Protect plug of electric line (6) against soiling with end cap (12).
