We hereby notify you that the refrigerant compressor must be stored standing for ten minutes after adaptation of the oil level before installation.
For this, set the refrigerant compressor with the drive plate (1) downward (see picture) in a suitable container and secure against tilting.
Then turn the shaft of the refrigerant compressor manually over the drive plate (1) three times approx. 90° in both directions. When doing so, hold refrigerant compressor with the drive plate (1) downwards (see picture).
This guarantees that any interrupted film is reproduced and leaks are avoided when emptying/filling the refrigerant circuit.
1 | Drive plate |
P83.55-2351-02