Service Information: Retrofit fastening clip on switch unit for
heater/ventilation
ประเภท si · หัวข้อ 83.20 · เวอร์ชัน 0101 · 2014-01-15
ใช้กับ: MODEL 374.502/523/551/554/557/584 with BODY 374.860 MODEL 374.602/651/655/682/685 with BODY 374.870 MODEL 374.607/691/695, 940, 942, 943, 944 with BODY 944.890 MODEL 375.1 with BODY 375.850 MODEL 375.3 with BODY 375.820 MODEL 375.4 with BODY 375.860 MODEL 950.5/6, 952.5/6, 953.6, 954.5 with BODY 940.890 MODEL 970, 972, 974, 975, 976 with BODY 972.890
Service Information: Retrofit fastening clip on switch unit for heater/ventilation
13.01.2014
MODEL
374.502/523/551/554/557/584 with BODY 374.860
MODEL
374.602/651/655/682/685 with BODY 374.870
MODEL
374.607/691/695, 940, 942, 943, 944 with BODY 944.890
MODEL
375.1 with BODY 375.850
MODEL
375.3 with BODY 375.820
MODEL
375.4 with BODY 375.860
MODEL
950.5/6, 952.5/6, 953.6, 954.5 with BODY 940.890
MODEL
970, 972, 974, 975, 976 with BODY 972.890
We would like to remind you that mounting slip (2) for the electrical wiring harness must be retrofitted if it is not available when installing or replacing switch unit (1) for heating/ventilation. The mounting clip (2) prevents the electrical wiring harness from coming into contact with the operating levers of the switch unit (1). The mounting clip (2) is glued to the center of the reverse side of housing of switch unit (1).