In the event of an audio/COMAND theft and a resulting cable damage the wiring harness can be repaired or ordered separately.
An order and a replacement of a complete interior wiring harness for the "frame-floor system" is not required.
Parts identification - notes on EPC:
As of EPC edition 07/2011, notes are filed in the system to provide assistance for parts identification, ordering and repair.
General information:
Questions on parts identification, ordering and repair are to be addressed to the
Technical Workshop Support or
through a direct query from the EPC (XSF)
The notes are available in the EPC at "What is new?" "FAQ - Frequently Asked Questions":
How can connector housing and contacts be determined for the wiring harness repair?
Where are general repair materials available for wiring harness repairs?
How is the part number of the vehicle-specific available wiring harnesses determined?
Repair of "non"-antenna lines and "normal copper" lines:
All "non" antenna or video lines and optical fibers ("normal copper" lines) can be repaired in line with the repair methods.
The corresponding repair methods are available in the table at the end of the Service Information.
Depending on the model series involved, the wiring harnesses may be represented in different design groups.
Antenna lines:
Generally, all antenna lines can be ordered individually or as modules through EPC.
Procedure in EPC:
Qualified entry through vehicle identification number (VIN)
Select design group:
...54/410
...54/545
.../82/310 (ascending)
The picture charts are to be used in the respective design group or subgroup. The text descriptions and code variants here for each part number must be observed.
Low voltage differential signal (LVDS) lines:
All LVDS lines (video line from COMAND to central display) can be ordered individually.
Depending on the model series involved, the LVDS lines may be represented in different design groups.
The LVDS lines are located in the following design groups:
.../54/410... "Cockpit wiring harness"
.../54/545... "Frame floor system"
...82/310... (ascending)
The picture charts are to be used in the respective design group or subgroup.
MOST (Media Oriented System Transport) optical fiber:
All MOST optical fibers can be ordered individually.
The MOST optical fibers are located in the following design group:
.../54/545... "Frame floor system"
The picture charts are to be used in the respective design group or subgroup.
Repair wiring harness as per specified repair method | Model 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 231, 240, 242, 245, 246, 251, 292, 461, 463 | ||
General repair methods for wiring harness | Model 117, 124, 126, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 190, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 242, 245, 246, 251, 253, 292, 461, 463 |