SI77.20-P-0003A | Service information: Modified sliding/tilting roof closing procedure | 3.4.01 |
MODELS 215, 220
Modification notes
When the sliding/tilting roof is closing from the sliding position, the glass cover now always briefly moves 4 mm into the tilted position and then to the end position.
The glass cover rear edge adjustment is therefore performed to
0 + 1 mm from the tilted position.
The "AR77.20-P-1100M Sliding Roof Cover Adjustment" workshop literature will be corrected accordingly.
Benefits:
The appearance (transition to body) and wind noise at high speed can therefore be improved for W220 vehicles and C215 vehicles as of AJ 00/1.
Control module adaptation in DAS for close-via-tilt function: | |||
1 | Select overhead control panel control module | ||
2 | Select control module adaptation | ||
3 | Select coding of close-via-tilt function | ||
4 | Follow instructions in DAS | This coding possibility is available for control modules as of AJ 00/1 and as of diagnosis identifier 0/03. | |
ET control modules are coded to PASSIVE by default. STANDARD: The close-via-tilt function has been activated in the sliding/tilting roof since 30.11.2000. |