SI67.00-P-0002A | Service information on introduction of 2-component windshield adhesive | 26.1.00 |
MODEL 124, 129, 140, 168, 170, 202, 208, 210, 215, 220
After introduction of the 2-component windshield adhesive and the Betagun 2-component electric cartridge gun required for its application on model C215, the existing window adhesives are now to be replaced successively according to the table below.
The existing repair instructions are also to be revised successively.
In general, the processing notes as described
for model 215 shall apply.
| Processing notes for 2-component window adhesive | Refer to: Removing, installing windshield, model 215 |
Vehicle model | Repair kit no. | Field of application |
Model 124 (sedan) | A 220 670 00 93 | Windshield, rear window |
Model 124 (T-model) | A 220 670 00 93 | Windshield |
Model 129 | A 220 670 00 93 | Windshield, rear and side windows at coupe roof |
Model 140 | A 220 670 00 93 | Windshield, rear window |
Model 168 | A 220 670 00 93 | Windshield, triangular side windows |
Model 168 | A 168 670 00 93 | Rear window Note: With original tailgate: without plastic primer (old glueing bead) Spare wheel and battery recesses Note: Apply plastic primer in spare wheel recess or battery recess prior to applying adhesive. |
Model 170 | A 220 670 00 93 | Windshield, rear window |
Model 202 | A 220 670 00 93 | Windshield, rear window, rear side windows |
Model 208 (convertible) | A 220 670 00 93 | Windshield |
Model 208 (coupe) | A 208 670 00 93 | Rear window (other nozzle) |
Model 208 (coupe) | A 220 670 00 93 | Windshield, rear side windows |
Model 210 | A 220 670 00 93 | Windshield, rear window, rear side windows |
Model 215 | A 220 670 00 93 | Windshield, rear window |
Model 215 | A 168 670 00 93 | Spare wheel recess Note: Apply plastic primer in spare wheel recess prior to applying adhesive. |
Model 220 | A 220 670 00 93 | Windshield, rear window |
Model 220 | A 168 670 00 93 | Spare wheel recess Note: Apply plastic primer in spare wheel recess prior to applying adhesive. |