A | Marking up to production 29.2.2008 |
B | Marking as of production 1.3.2008 |
C | Marking as of production 2.11.2009 |
P61.10-2224-04
On vehicles as of production 2.11.2009 the inner right attachment point of the right shielding has been displaced.
The shielding on the right main floor A 204 682 90 71 replaces the previous replacement part A 204 682 04 71 or A 204 682 76 71 or
A 204 682 79 71.
The part A 204 682 90 71 can be used for vehicles up to and as of production in November 2009. The required mounting hole still has to be drilled in this shielding.
Depending on the point in time when the vehicle was produced the mounting hole must be drilled or punched in the shielding at one of three markings (A, B, C).
A On vehicles up to production 29.2.2008 the marking A must be punched out in the form of an elongated hole. At the marking A there is no more embossing on the shield, the threaded connection at this point must therefore take place with the combination nut A 002 990 09 50.
B On vehicles as of production 1.3.2008 the marking B is to be punched out in the form of an elongated hole.
C The marking C is to be drilled on vehicles as of production 2.11.2009.