Modification notes
S35.31-4521-01
1 Differential
2 Drive flange
Replacing rear axle center section
To prevent any damage to the new rear axle differential (1), approx. 0.05 l of oil must be added before installing the rear axle differential (1).
The drive flange (2) should point downward during filling.
Then turn drive flange (2) approx. 10 times to ensure that the entire bearing is moistened with oil
After installing the rear axle differential, it must be filled up to the specified filling capacity.
Moisten thread of oil filler opening bolt with oil and tighten to the following torque: 90 Nm.
The value in BA35.31-N-1002-02B has been corrected.
Differential