SI30.35-W-0003A | Service information: Remove/install Mercedes PowerShift 2 fleet in aftermarket | 24.6.09 |
MODEL 930, 932, 933, 934 with CODE (GE7) Mercedes PowerShift 2
MODEL 930, 932, 933, 934 with CODE (GE8) Mercedes PowerShift 2 - fleet series
Since the start of production of the third generation of Actros, the code (GE8) Mercedes PowerShift 2 - fleet series is available as special equipment ex (point of origin) in combination with code (GE7) Mercedes PowerShift 2.
To ensure that the code (GE8) Mercedes PowerShift 2 - fleet series can be removed in the aftermarket if a customer so wishes, the removal instructions AN30.35-W-0001A "Remove Mercedes PowerShift 2 fleet series in aftermarket" have been compiled.
The retrofitting of the code (GE8) Mercedes PowerShift 2 - fleet series is described in the installation instructions
AN30.35-W-0002A "Retrofit Mercedes PowerShift 2 fleet series " .
When ordering the required parts kits, the vehicle's data card is automatically updated in VeDoc.
This serves to ensure that when a drive control (FR) control unit is replaced, the correct parameters are copied during the online parameterization.