29.5-065 Removal and installation of brake pedal
Removal and installation
1 Remove left-hand foot mat.
2 Remove trim above brake pedal.
3 Remove steering shaft trim.
4 Disconnect 2-pin plug connection on stop lamp switch (5).
5 Unhook spring (6).
6 Unlock collared pin (2) and remove with washer (4).
Installation note
Install new cotter pin (11).
7 Remove piston rod (3).
8 Unscrew hexagon bolt (7) with lock washer and remove locking device (8).
Installation note
Securely tighten hexagon bolt (7), 10 Nm.
9 Remove bearing pin (9) and remove brake pedal (10).
Installation note
Lubricate bearing pin (9) with long-life grease.
10 Remove bushes (11) on brake pedal.
Installation note
Install new bushes (1).
11 Install in reverse sequence.
12 Adjust lost motion of brake control
(29.5-035).
13 Adjust stop lamp switch (29.5-050)