0110 - Adjustment of the cable for the control pressure Automatic transmission 722.3 from 09/88

27-110 Adjusting cable for control pressure

Adjusting


The engine throttle control must be correctly adjusted.

Vehicles with engines 103 and 603.96
1 Detach ball socket (19) and pull control pressure cable forwards until slight resistance can be felt. In this position, hold the ball socket over the ball head and attach; if necessary, adjust by means of the adjusting screw (15).

P27-0006-13<

Engine 103.98

P27-5314-13

Engine 603.96

P27-2147-13

Vehicles with engines 116 and 117
1 Remove air cleaner.

2 Slacken clamping screw (6) on connecting rod (8).

3 Extend connecting rod (8) and compress again until slight resistance can be felt. Then tighten clamping screw (6).

4 Refit air cleaner.

P27-5233-13

Vehicles with engine 104
1 Remove air cleaner.

2 Control pressure cable attached. Adjust control pressure cable (98) by turning adjusting screw (15) until the tips of the needles are in alignment.

P27-5310-15

Engine 104 with electronic accelerator pedal

P27-5311-15

Vehicles with engine 119

1 Remove air cleaner.

2 Turn adjusting screw (15) on bowden cable (98) until the pointer of the spacer sleeve (17) aligns with the adjusting screw.

P27-2420-13

Vehicles with engine 119.97

1 Remove air cleaner.

2 Slacken hexagon nuts (6) on connecting rod (8).

3 Turn connecting rod (8) until the tips of the needles are in alignment.

4 Tighten hexagon nuts (6).

P27-2418-13

Engine 120

Remove air cleaner. Turn adjusting screw (15) to adjust control pressure cable (98) until the tips of the needles are in alignment.