PE07.08-P-2101-60FA | Legend of wiring diagram for the CGI gasoline direct injection system control unit | ENGINE 271 in MODEL 203 |
Code | Designation | Coordinates |
A0 | Color code key | 56L |
B4/1 | Left fuel level sensor | 13L |
B4/2 | Right fuel level sensor | 14L |
B4/3 | Fuel tank pressure sensor | 50L |
B19 | catalytic converter temperature sensor | 27L |
B37 | Accelerator pedal sensor | 38L |
F32 | Front prefuse | 19L |
F32f5 | Prefuse 5 | 18K |
M3 | Fuel pump | 12L |
M4/7 | Engine and AC electric suction fan with integrated control | 17L |
N3/10 | ME-SFI [ME] control unit | 4A |
N10/1 | Front SAM control unit with fuse and relay module | 5L |
N10/1f53 | Fuse 53 | 10J |
N10/1f54 | Fuse 54 | 11J |
N10/1kR | Circuit 87 relay, engine | 10L |
N37/4 | NOX (nitrogen oxides) control unit | 34L |
N37/4b1 | NOX sensor (nitrogen oxides) | 36L |
S40/3 | Clutch pedal switch | 52L |
U1 | Valid for | 43A |
U12 | Valid for left-hand drive vehicles | 2C |
U13 | Valid for right-hand drive vehicles | 2D |
U24 | Valid for manual transmission | 20A |
W9 | Ground (left front, at lamp unit) | 16H |
W16/3 | Ground (left assembly compartment, power ground) | 51G |
W16/5 | Electronics ground (left of component compartment) | 3E |
W16/6 | Electronics ground (right of component compartment) | 3F |
W19 | Ground (right front seat crossmember) | 31G |
X11/4 | Data link connector | 24L |
X15 | Engine fan connector/100°C temperature switch | 15F |
X25/4 | Fuel tank (pressure, activated charcoal filter) connector | 48E |
X25/9 | Activated charcoal filter connector | 47G |
X26/2 | Engine separation point connector | 29E |
X63/4 | CAN data bus adapter connector (2-pin) | 41L |
X86/1 | NOX control unit separation point | 32G |
X86/2 | NOX temperature sensor connector | 26G |
Y58/1 | Purge control valve | 25L |
Y58/4 | Activated charcoal filter shutoff valve | 48L |
Z7/36z1 | Circuit 87M2e connector sleeve | 10E |
Z7/36z2 | Circuit 87M2e connector sleeve | 24G |
Z20/35 | CAN bus screening end | 35G |