_________________________________________________________________________________________________________________________________ | ||||
Company-owned sales and service outlet/Dealer no. | Customer | |||
________________________________________________________________ | ||||
Vehicle identification number | Repair job no. | |||
________________________________________________________________ | ||||
Tester: Name | Date | |||
_________________________________________________________________________________________________________________________________ | ||||
Vehicle registration number | First registration | Model | Engine no. | Odometer reading: km/miles |
File paintwork damage sheets in a tamperproof manner.
Description of damage and probable cause | MB color shade |
___________________________________________________ | ___________________________________________________ |
___________________________________________________ | |
___________________________________________________ | |
___________________________________________________ | |
Damage inflicted while driving (e.g.: accident, dents, scratches, stone chipping, etc.) are to be specified separately. | ||
When was damage noticed? | ___________________________________________________ | |
State of paintwork | ☐ Maintained | ☐ Neglected |
Required remedial action | Cost estimate | |
Comments of Warranty Department | ||
S98.10-4507-05
Paint | Damaged part text | Paint | Damaged part text |
9800G | Pop-up roof | 98178 | Left front door handle |
9800H | Roof spoiler | 98203 | Right side wall |
98055 | Rear-end door/liftgate | 98204 | Right sliding door guide rail cover |
98059 | Cross member, rear door | 98210 | Right side window cutout |
98061 | Engine hood | 98211 | Right front door fold |
98064 | Roof | 98221 | Right sliding door entry |
98068 | Radiator trim | 98234 | Cross member, right door cutout |
98071 | Rear center section | 98244 | Right entrance |
98081 | Body, general | 98251 | Right front fender |
98089 | Flap for ventilation/fuel tank/battery | 98252 | Right front door |
98097 | Disk wheel | 98276 | Right sliding door |
98100 | Side wall below guide rail | 98278 | Right front door handle |
98103 | Left side wall | 98327 | Rear window cutout |
98104 | Guide rail cover left sliding door | 98374 | Trunk lid handle license plate lamp cover |
98110 | Left side window cutout | 98401 | Front bumper paneling |
98111 | Left front door fold | 98411 | Outside left side member trim |
98121 | Left sliding door entry | 98412 | Outside right side member trim |
98134 | Cross member, left door cutout | 98421 | Rear bumper paneling |
98144 | Left entrance | 98422 | Trailer hitch cover |
98151 | Left front fender | 98424 | Right outside mirror |
98152 | Left front door | 98425 | Left outside mirror |
98176 | Left sliding door |
S98.10-4506-05
Paint | Damaged part text | Paint | Damaged part text |
98022 | Window ledge / Windshield cutout | 98243 | Right C-pillar |
98031 | Front end front wall | 98245 | Right wheel well |
98141 | Left A-pillar | 98246 | Right headlamp support |
98142 | Left B-pillar | 98264 | D-pillar, right |
98143 | Left C-pillar | 98305 | Body sealing joint |
98145 | Left wheel well | 9830A | Body sealing seam at roof |
98146 | Left headlamp support | 98311 | Cargo space interior floor |
98148 | Partition wall | 98231 | Cargo space headliner |
98164 | Left D-pillar | 98339 | Body reinforcement |
98241 | Right A-pillar | 98358 | Front mounting plate |
98242 | Right B-pillar | 98367 | Seat frame |
S98.10-4508-05
Paint | Damaged part text | Paint | Damaged part text |
98009 | Shock absorber/suspension strut | 98291 | Right outer longitudinal member |
98085 | Underfloor protection | 98321 | Transverse control arm |
98091 | Frame-type integral support | 98346 | Stabilizer bar |
98095 | Front axle | 98347 | Trailer hitch with ball head |
98096 | Rear axle | 98355 | Crossmember |
98191 | Left outer longitudinal member |
Paint | Damaged part text | Paint | Damaged part text |
76 | Seam sealing incomplete | L6 | Blisters |
K1 | Dust/ dirt inclusion | L7 | Orange peel development/structure |
K2 | Paint runs | L8 | Grinding scoring |
K3 | Color deviation | L9 | Polishing marks |
K4 | Cloudy | LA | Abrasion |
K6 | Edge zone marking | LB | Fading |
K7 | Defects | LC | Chalking |
K9 | Adhesion faults | LD | Insufficient hiding power |
L1 | Mask edges | Y4 | Separation of the outer and inner surfaces from the core |
L2 | Cracks | Y6 | Popping |
L3 | Preservation residue | Y7 | Crater |
L4 | Overspray |
Normalized measuring points |
N98.10-2093-05
Coat thickness on painted external parts:
Standard paintwork at least 77 μm
Metallic paintwork at least 89 μm
Coat thickness on painted external parts:
Standard paintwork at least 50 μm
Metallic paintwork at least 50 μm