W00.00-1096-08
This questionnaire must be filled out for every rejected air compressor during the warranty & goodwill period. Before this however, each air compressor must always be checked in accordance with the methods described in the WIS with regard to delivery rate and oil discharge. The technical facts resulting from the tests are required for filling out this questionnaire.
For a warranty or goodwill claim the removed air compressor must be submitted for inspection together with the completely filled out questionnaire and the test sheet used when testing for oil discharge.
General information |
Test equipment no. of test compressed air reservoir: | ||
Body type: | Body manufacturer: | |
Previous workshop visits: | ||
Suspension |
Full air suspension ☐ | Partial air suspension ☐ | Steel suspension ☐ |
Emissions standard |
Euro III Standard ☐ | Euro IV Standard ☐ | Euro V Standard ☐ | EEV Standard ☐ | Euro VI Standard ☐ |
Type of service |
Long-distance haulage ☐ | Distribution haulage ☐ | Construction-site traffic ☐ |
Complaint |
What is the customer's complaint? | ||
Have parts been replaced? No ☐ | Yes ☐ | |
If yes, - which ones: | Designation: | Part number: |
Other comments: | ||
Values determined from delivery rate check with test compressed air reservoir |
Motor | Air compressor code (e.g. MZ7, M6M) | Test procedure | Specified value according to work instructions | Actual value determined | Comment |
Fill time up to specified pressure is reached in test/compressed air reservoir at specified engine rpm | |||||
Pressure drop after specified test duration |
Result of oil discharge test |
Which findings were determined on the basis of the oil discharge test? |
Other tests/work |
Which additional or other tests/operations were conducted? |
Final findings report from workshop |
Which final findings were determined by the workshop? |