GF98.00-D-4005SP | Detachable parts: substrates, paintwork and paintwork structure | 23.7.07 |
MODEL 906
SPRINTER
N98.00-2201-09
Item | Designation | Material | Series production finish |
1.1 | Front bumper | PP/COPO | Painted/unpainted |
1.2 | Air grille in front bumper | PP/COPO | Not painted |
1.3 | Radiator grille /radiator screen | ASA | Not painted |
1.4 | Engine hood | Steel EN 10130-1.0338+A | Painted (primed) |
1.5 | Air inlet grille | ASA | Unpainted (dyed) |
1.6 | Roof | Steel EN 10130-1.0338+A | Painted (primed) |
1.7 | Door handle | PA-GF | Not painted |
1.8 | Bumper corners | PP/COPO | Painted/unpainted |
1.9 | Bumper center part | PP/COPO | Painted/unpainted |
1.10 | Rear-end door | Steel EN 10130-1.0338+A | Painted (primed) |
1.11 | Side wall | Steel | Painted (primed) |
1.12 | Water shield | PE/LD or PP/EDM | Unpainted (dyed) |
1.13 | Protective strips | PP/COPO | Unpainted (dyed) |
1.14 | Paneling | Steel | Painted (primed) |
1.15 | Door handle | PA-GF | Unpainted (dyed) |
1.16 | Shaft molding | EPDM | Not painted |
1.17 | Door | Steel EN 10130-1.0338+A | Painted (primed) |
1.18 | Water shield | PE/LD or PP/EDM | Unpainted (dyed) |
1.19 | Exterior rearview mirrors | ABS | Unpainted (dyed) |
1.20 | Panel | ASA | Unpainted (dyed) |
1.21 | Fenders | Steel EN 10130-1.0338+A | Painted (primed) |
1.22 | Use of license plate molding | ABS | Unpainted (dyed) |
N98.00-2202-09
Color code
Dark gray Steel
Light gray Plastic
Paintwork/corrosion protection in series production, general | |||
Color ranges in general | |||
Galvanizing, general | |||
Underfloor protection, general | |||
Filler, general | |||
Top coat, general | |||
Detachable parts, general: substrate, paint and paint structure | |||
Table of contents for paintwork and anticorrosion materials in series production |