gf9160p2008a

Supplemental restraint system pressure sensors, basic function

ประเภท gf · หัวข้อ 91.60 · เวอร์ชัน 0103 · 2019-12-09

ใช้กับ: Model all (CAR)

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 91 Seats, bunks, restraint systems › 91.60 Airbag, pedestrian protection — ซีรีส์ 900 (รุ่น 9**) · ซีรีส์ 902 (รุ่น 9**) · ซีรีส์ 904 (รุ่น 918, 919, 924, 925, 938, 943, 957) · ซีรีส์ 906 (รุ่น 917, 918, 924, 953)

ใช้กับเครื่องยนต์/เกียร์ด้วย: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

GF91.60-P-2008A

Supplemental restraint system pressure sensors, basic function

27.11.2019

Model

all (CAR)

Overview

This document contains the following information:

Location

Task

Supplemental restraint system pressure sensors, basic function

P91.60-5260-77

Front door pressure sensors

1

Driver door pressure sensor

2

Front passenger door pressure sensor

Supplemental restraint system pressure sensors, basic function

P91.60-5274-77

Rear door pressure sensors (with code 293 (Side airbag in the rear at left and right))

3

Left rear door pressure sensor

4

Right rear door pressure sensor

Location

The pressure sensors are located behind the paneling of the respective door.

Task

The pressure sensors measure the air pressure on the inside of the doors. A side impact is defined as a sudden change of air pressure (e.g. the door being indented from the outside). The Supplemental Restraint System (SRS) control unit processes information from the pressure sensors.

The pressure sensors perform self-tests. The SRS control unit evaluates the results of these self-tests.

The measuring range and sensitivity of the pressure sensors are checked by the SRS control unit to ensure that they match the programmed equipment. The production data of the pressure sensors can be read out using the diagnostic tester.