P83.40-5552-09
Shown on 2-zone automatic climate control |
1 | Central air distribution actuator motor | 8 | Evaporator temperature sensor | |
2 | Activated charcoal fine particle filter | 9 | Blending air flap actuator motor | |
3 | Fresh air/air recirculation flap actuator motor | 10 | Blending air flap | |
4 | Fresh air/recirculated air flap | 11 | Heating system heat exchanger | |
5 | Blower | 12 | PTC heater booster | |
6 | Blower regulator | 13 | Air distribution flap | |
7 | Evaporator |
Depending on the vehicle model and the equipment installed, additional actuator motors and air flaps may be located in the air conditioner housing and in the air ducts under the center console.
General
The components of the climate control system, which are responsible for air delivery, filtering and temperature control, are located in the air conditioner housing.
Location
The air conditioner housing is located between the instrument panel and the firewall.
Function requirement
Circuit 30t ON