gf8270p0201kn

Mobile phone cradle control unit component description

ประเภท gf · หัวข้อ 82.70 · เวอร์ชัน 0102 · 2014-08-06

ใช้กับ: MODEL 176 with CODE 516 (Audio 5 radio with USB interface) with CODE B22 (Drive Kit for the iPhone® 4/4S)'

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 82 Electrical system, body › 82.70 Telephone, Voice-control-system(VCS) — ซีรีส์ 176

GF82.70-P-0201KN

Mobile phone cradle control unit component description

23.7.14

MODEL

176

with CODE 516 (Audio 5 radio with USB interface)

with CODE B22 (Drive Kit for the iPhone® 4/4S)

Mobile phone cradle control unit component description

Shown on MODEL 176

A34/2

iPhone® cradle control unit

P82.70-7596-06

Location

The iPhone® cradle control unit is located in the glove compartment.

Tasks

Connection of an iPhone® to the vehicle

Voltage supply

Receive signals

Transmitting signals

Connection of an iPhone® to the vehicle

Using the iPhone® cradle control unit and the iPhone® cradle (A34/2x1), an iPhone 4® or iPhone 4S® can be integrated into the audio and communication system of the vehicle.

For connection to the vehicle, the iPhone® requires a special software, the "Mercedes-Benz drive app for the iPhone", that can be procured in an app store.

Voltage supply

The iPhone® cradle control unit is supplied with power via circuit 30g and circuit 31.

The iPhone® cradle control unit supplies the connected iPhone® with power via the iPhone® cradle.

Receive signals

Bluetooth®

Receiving telephone signals from the iPhone®

Direct line

Receiving audio and control signals from the connected iPhone® via the iPhone® cradle

Receiving the switch-on and switch-off signal from the radio (A2)

Receiving the audio signals (voice input) from the hands-free system microphone (B25/12)

Receiving audio signals from the AUX connection electrical connector (X39/45) (up to 30.11.2013)

Transmitting signals

Bluetooth

Telephone signals from the hands-free system microphone to the connected iPhone®

Direct line

Forwarding of the switch-on and switch-off signal via the iPhone® cradle to the connected iPhone®

Sending signals for device recognition and identification via the iPhone® cradle to the connected iPhone®

Sending audio and telephone signals to the AUX-1 input of the radio

Sending voice output for navigation to the AUX-3 input of the radio

Sending the mute signal (MUTE telephone) and the signal for turning down the volume of the audio source (MUTE navigation) to the radio

The navigation messages are only output over the speaker system of the vehicle (and the volume of the active audio source turned down in the meantime) if the navigation mode integrated in the "Mercedes-Benz drive app for the iPhone" is used on the iPhone®.