GF82.30-P-4007A | Function of braking wiper motor | 14.12.96 |
MODEL 202 as of 1.6.97,
208, 210.081 /281,
210 (except 210.081 /281) as of 1.3.97
If a wiping operation is to be completed properly, the wiper arm must stop in the rest position. For this purpose the signal acquisition and actuation module (SAM) (N10/1) reads in the status of the cam switch. The cam switch is actuated as it moves passed the rest position. The SAM switches off the relay and
-----------------------------------------------------------------------------------------
brakes the wiper motor (M6/1) by short circuiting via an electronic circuit.
If circuit 15R is switched off before reaching the rest position,
the motor stops immediately.
-----------------------------------------------------------------------------------------