Fuel tank position/design/function

GF47.10-P-3000H

30.5.96

MODEL 202.120 with ENGINE 601.913

MODEL 202.121 /182 with ENGINE 604.910

MODEL 202.122 /180 with ENGINE 604.915

MODEL 202.125 with ENGINE 605.910

MODEL 202.128 /188 with ENGINE 605.960

MODEL 202.133 /193 with ENGINE 611.960

P47.10-0299-05

80 Fuel tank

80/4 Suction jet pump, left

80/5 Splashpot

89 Blanking plate, left

Fuel tank position	The fuel tank (80) is attached to the frame floor in front of the rear axle.
Fuel tank design	The fuel tank (80) is divided into two chambers due to the U-shaped recess. The chambers are connected to each other in the upper area. The splashpot (80/5), connecting pipe between the left and right fuel chamber, blanking plate with fuel level sensor, drain valves and a suction jet pump (80/4) are installed in the lower area.
Function of fuel tank,		GF47.10-P-3000-01H
Location/task/design/function of fuel level sensor		GF47.10-P-3001H
Task/design/function of drain valves		GF47.10-P-3100H
Location/task/function of splashpot		GF47.10-P-3101H
Location/task/design/function of suction jet pump		GF47.10-P-3102H
Task/design of blanking plate		GF47.10-P-3103H