GF42.10-B-4001B | Sliding caliper disc brake, function | 12.02.16 |
MODEL 688.232/ 254/ 255/ 276 with Wabco disc brake
B42.10-0345-06
1 Brake caliper.
2 Support
3 Caliper cover
4 Internal hex bolt
5 Internal hex bolt with flange
6 Short guide pin
7 Long guide pin
8 Cover
9 Lever
10 Follower pin
11 Compression springs
12 Distance plate
13 Adjustment screw
15 Intermediate pressure plate
16 Transmission sleeve
17 Passive sleeve
18 Washers
Composition | The main components of the disc brake with sliding brake caliper are: - Ventilated brake disc (3). - Support fastened to rear axle and to front axle steering knuckle where there is the brake caliper (1) guided by the pins (6) and (7) - Brake pads (4). - Actuation device that presses through the lever (9) the intermediate pressure plate (15) against the brake pads. - Adjustment device integrated in the brake caliper. The disc brake with sliding caliper is activated by means of pneumatic combined and membrane cylinders. | ||
Brake application and release - operation | |||
Brake regulator - operation |