GF07.03-P-3151C | Injection nozzle position / task / design / function | 5.7.96 |
ENGINE 602.982 in MODEL 210.017 /217 /617
P07.10-0225-81
Design
50/2 Nozzle needle
50/3 Nozzle body
50/5 Spray pintle
50/7 Pressure shoulder
50/8 Pressure chamber
50/9 Spray holes ( 0.22 mm)
50/10 Blind hole
Designation
Bosch DSLA 148 P 590
D Nozzle
S Seat hole
L Long design
A without annular groove
148 Spray hole angle in degrees
P Size designation (14 mm shoulder)
590 Version code
Task | Injecting the fuel supply by the DFI distributor injection pump as a metered flow into the combustion chamber. | ||
Function | A spray cone is formed with fine atomization as a result of the 5 spray holes in the nozzle body. 5 different ejection angles exist as a result of the installation position. |