MODEL | 163, 168, 202, 203, 208.3, 209.3, 210, 211, 215, 220, 240, 414 |
Test and adjustment values for tilting/sliding roof |
Number | Designation | MODEL 163 | MODEL 168 | ||
BE77.20-P-1001-01A | Gap dimensions | Tilting/sliding roof cover, front | mm | – | – |
Tilting/sliding roof cover, on side and rear | mm | – | – | ||
BE77.20-P-1002-01A | Height setting | Measuring position "A" (x) | mm | 140 | 80 |
Front: deeper than outer skin of roof | mm | 0...1 | 0...2 | ||
Rear: higher than outer skin of roof | mm | 0...1 | 0...2 | ||
BE77.20-P-1003-01A | Gap dimensions | Lamella to lamella, position "C" | mm | – | 3...4 |
Lamellas to roof cutout, position "B" | mm | – | 4...5 | ||
BE77.20-P-1004-01A | Height adjustment wind deflector to tilting/sliding roof | Wind deflector higher than tilting/sliding roof | mm | – | – |
BE77.20-P-1005-01A | Height adjustment tilting/sliding roof to glass roof, rear | Tilting/sliding roof higher than glass roof, rear | mm | – | – |
BE77.20-P-1006-01A | Height adjustment, rear glass roof to rear-end door window | Glass roof, rear, higher than rear window | mm | – | – |
BE77.20-P-1007-01A | Gap dimensions | Wind deflector to tilting/sliding roof | mm | – | – |
Tilting/sliding roof to glass roof, rear | mm | – | – | ||
Glass roof, rear, to rear window | mm | – | – | ||
Windshield to outer mounting clamp of trim strip | mm | – | – | ||
BE77.20-P-1008-01A | Gap dimensions | Mounting clips water deflector to glass roof outer edge | mm | – | – |
BE77.20-P-1009-01A | Gap dimensions | Rear glass roof for rear window | mm | – | – |
BE77.20-P-1010-01A | Height adjustment of rear glass roof to rear window | Rear glass roof higher than rear window | mm | – | – |
Test and adjustment values for tilting/sliding roof |
Number | Designation | MODEL 202 | MODEL 203.0 | ||
BE77.20-P-1001-01A | Gap dimensions | Tilting/sliding roof cover, front | mm | 0,15 | 0,15 |
Tilting/sliding roof cover, on side and rear | mm | 0,30 | 0,30 | ||
BE77.20-P-1002-01A | Height setting | Measuring position "A" (x) | mm | 140 | 140 |
Front: deeper than outer skin of roof | mm | 0...1 | 0...1 | ||
Rear: higher than outer skin of roof | mm | 0...1 | 0...1 | ||
BE77.20-P-1003-01A | Gap dimensions | Lamella to lamella, position "C" | mm | – | – |
Lamellas to roof cutout, position "B" | mm | – | – | ||
BE77.20-P-1004-01A | Height adjustment wind deflector to tilting/sliding roof | Wind deflector higher than tilting/sliding roof | mm | – | – |
BE77.20-P-1005-01A | Height adjustment tilting/sliding roof to glass roof, rear | Tilting/sliding roof higher than glass roof, rear | mm | – | – |
BE77.20-P-1006-01A | Height adjustment, rear glass roof to rear-end door window | Glass roof, rear, higher than rear window | mm | – | – |
BE77.20-P-1007-01A | Gap dimensions | Wind deflector to tilting/sliding roof | mm | – | – |
Tilting/sliding roof to glass roof, rear | mm | – | – | ||
Glass roof, rear, to rear window | mm | – | – | ||
Windshield to outer mounting clamp of trim strip | mm | – | – | ||
BE77.20-P-1008-01A | Gap dimensions | Mounting clips water deflector to glass roof outer edge | mm | – | – |
BE77.20-P-1009-01A | Gap dimensions | Rear glass roof for rear window | mm | – | – |
BE77.20-P-1010-01A | Height adjustment of rear glass roof to rear window | Rear glass roof higher than rear window | mm | – | – |
Test and adjustment values for tilting/sliding roof |
Number | Designation | MODEL 203.2 | MODEL 203.7 | ||
BE77.20-P-1001-01A | Gap dimensions | Tilting/sliding roof cover, front | mm | 0,15 | – |
Tilting/sliding roof cover, on side and rear | mm | 0,30 | – | ||
BE77.20-P-1002-01A | Height setting | Measuring position "A" (x) | mm | 140 | – |
Front: deeper than outer skin of roof | mm | 0...1 | – | ||
Rear: higher than outer skin of roof | mm | 0...1 | – | ||
BE77.20-P-1003-01A | Gap dimensions | Lamella to lamella, position "C" | mm | – | – |
Lamellas to roof cutout, position "B" | mm | – | – | ||
BE77.20-P-1004-01A | Height adjustment wind deflector to tilting/sliding roof | Wind deflector higher than tilting/sliding roof | mm | – | 1 (1) |
BE77.20-P-1005-01A | Height adjustment tilting/sliding roof to glass roof, rear | Tilting/sliding roof higher than glass roof, rear | mm | – | 1 (1) |
BE77.20-P-1006-01A | Height adjustment, rear glass roof to rear-end door window | Glass roof, rear, higher than rear window | mm | – | 0 (+2) |
BE77.20-P-1007-01A | Gap dimensions | Wind deflector to tilting/sliding roof | mm | – | 2 (1) |
Tilting/sliding roof to glass roof, rear | mm | – | 2 (1) | ||
Glass roof, rear, to rear window | mm | – | 9 (1) | ||
Windshield to outer mounting clamp of trim strip | mm | – | 7 (1) | ||
BE77.20-P-1008-01A | Gap dimensions | Mounting clips water deflector to glass roof outer edge | mm | – | 14 (–1) |
BE77.20-P-1009-01A | Gap dimensions | Rear glass roof for rear window | mm | – | – |
BE77.20-P-1010-01A | Height adjustment of rear glass roof to rear window | Rear glass roof higher than rear window | mm | – | – |
Test and adjustment values for tilting/sliding roof |
Number | Designation | MODEL 208.3 | MODEL 209.3 | ||
BE77.20-P-1001-01A | Gap dimensions | Tilting/sliding roof cover, front | mm | 0,15 | 0,15 |
Tilting/sliding roof cover, on side and rear | mm | 0,30 | 0,30 | ||
BE77.20-P-1002-01A | Height setting | Measuring position "A" (x) | mm | 140 | 140 |
Front: deeper than outer skin of roof | mm | 0...1 | 0...1 | ||
Rear: higher than outer skin of roof | mm | 0...1 | 0...1 | ||
BE77.20-P-1003-01A | Gap dimensions | Lamella to lamella, position "C" | mm | – | – |
Lamellas to roof cutout, position "B" | mm | – | – | ||
BE77.20-P-1004-01A | Height adjustment wind deflector to tilting/sliding roof | Wind deflector higher than tilting/sliding roof | mm | – | – |
BE77.20-P-1005-01A | Height adjustment tilting/sliding roof to glass roof, rear | Tilting/sliding roof higher than glass roof, rear | mm | – | – |
BE77.20-P-1006-01A | Height adjustment, rear glass roof to rear-end door window | Glass roof, rear, higher than rear window | mm | – | – |
BE77.20-P-1007-01A | Gap dimensions | Wind deflector to tilting/sliding roof | mm | – | – |
Tilting/sliding roof to glass roof, rear | mm | – | – | ||
Glass roof, rear, to rear window | mm | – | – | ||
Windshield to outer mounting clamp of trim strip | mm | – | – | ||
BE77.20-P-1008-01A | Gap dimensions | Mounting clips water deflector to glass roof outer edge | mm | – | – |
BE77.20-P-1009-01A | Gap dimensions | Rear glass roof for rear window | mm | – | – |
BE77.20-P-1010-01A | Height adjustment of rear glass roof to rear window | Rear glass roof higher than rear window | mm | – | – |
Test and adjustment values for tilting/sliding roof |
Number | Designation | MODEL 210 | MODEL 211 | ||
BE77.20-P-1001-01A | Gap dimensions | Tilting/sliding roof cover, front | mm | 0,15 | 0,15 |
Tilting/sliding roof cover, on side and rear | mm | 0,30 | 0,30 | ||
BE77.20-P-1002-01A | Height setting | Measuring position "A" (x) | mm | 140 | 140 |
Front: deeper than outer skin of roof | mm | 0...1 | 0...1 | ||
Rear: higher than outer skin of roof | mm | 0...1 | 0...1 | ||
BE77.20-P-1003-01A | Gap dimensions | Lamella to lamella, position "C" | mm | – | – |
Lamellas to roof cutout, position "B" | mm | – | – | ||
BE77.20-P-1004-01A | Height adjustment wind deflector to tilting/sliding roof | Wind deflector higher than tilting/sliding roof | mm | – | 1 (1) |
BE77.20-P-1005-01A | Height adjustment tilting/sliding roof to glass roof, rear | Tilting/sliding roof higher than glass roof, rear | mm | – | 1 (1) |
BE77.20-P-1006-01A | Height adjustment, rear glass roof to rear-end door window | Glass roof, rear, higher than rear window | mm | – | – |
BE77.20-P-1007-01A | Gap dimensions | Wind deflector to tilting/sliding roof | mm | – | 1 (1) |
Tilting/sliding roof to glass roof, rear | mm | – | – | ||
Glass roof, rear, to rear window | mm | – | – | ||
Windshield to outer mounting clamp of trim strip | mm | – | – | ||
BE77.20-P-1008-01A | Gap dimensions | Mounting clips water deflector to glass roof outer edge | mm | – | – |
BE77.20-P-1009-01A | Gap dimensions | Rear glass roof for rear window | mm | – | 5 (1) |
BE77.20-P-1010-01A | Height adjustment of rear glass roof to rear window | Rear glass roof higher than rear window | mm | – | 5 (0,5) |
Test and adjustment values for tilting/sliding roof |
Number | Designation | MODEL 215 | MODEL 220 | ||
BE77.20-P-1001-01A | Gap dimensions | Tilting/sliding roof cover, front | mm | 0,15 | 0,15 |
Tilting/sliding roof cover, on side and rear | mm | 0,30 | 0,30 | ||
BE77.20-P-1002-01A | Height setting | Measuring position "A" (x) | mm | 140 | 140 |
Front: deeper than outer skin of roof | mm | 0...1 | 0...1 | ||
Rear: higher than outer skin of roof | mm | 0...1 | 0...1 | ||
BE77.20-P-1003-01A | Gap dimensions | Lamella to lamella, position "C" | mm | – | – |
Lamellas to roof cutout, position "B" | mm | – | – | ||
BE77.20-P-1004-01A | Height adjustment wind deflector to tilting/sliding roof | Wind deflector higher than tilting/sliding roof | mm | – | – |
BE77.20-P-1005-01A | Height adjustment tilting/sliding roof to glass roof, rear | Tilting/sliding roof higher than glass roof, rear | mm | – | – |
BE77.20-P-1006-01A | Height adjustment, rear glass roof to rear-end door window | Glass roof, rear, higher than rear window | mm | – | – |
BE77.20-P-1007-01A | Gap dimensions | Wind deflector to tilting/sliding roof | mm | – | – |
Tilting/sliding roof to glass roof, rear | mm | – | – | ||
Glass roof, rear, to rear window | mm | – | – | ||
Windshield to outer mounting clamp of trim strip | mm | – | – | ||
BE77.20-P-1008-01A | Gap dimensions | Mounting clips water deflector to glass roof outer edge | mm | – | – |
BE77.20-P-1009-01A | Gap dimensions | Rear glass roof for rear window | mm | – | – |
BE77.20-P-1010-01A | Height adjustment of rear glass roof to rear window | Rear glass roof higher than rear window | mm | – | – |
Test and adjustment values for tilting/sliding roof |
Number | Designation | MODEL 240 | MODEL 414 | ||
BE77.20-P-1001-01A | Gap dimensions | Tilting/sliding roof cover, front | mm | 0,15 | 3,08 |
Tilting/sliding roof cover, on side and rear | mm | 0,30 | 3,26 | ||
BE77.20-P-1002-01A | Height setting | Measuring position "A" (x) | mm | 140 | – |
Front: deeper than outer skin of roof | mm | 0...1 | 0...1 | ||
Rear: higher than outer skin of roof | mm | 0...1 | 0...1 | ||
BE77.20-P-1003-01A | Gap dimensions | Lamella to lamella, position "C" | mm | – | – |
Lamellas to roof cutout, position "B" | mm | – | – | ||
BE77.20-P-1004-01A | Height adjustment wind deflector to tilting/sliding roof | Wind deflector higher than tilting/sliding roof | mm | – | – |
BE77.20-P-1005-01A | Height adjustment tilting/sliding roof to glass roof, rear | Tilting/sliding roof higher than glass roof, rear | mm | – | – |
BE77.20-P-1006-01A | Height adjustment, rear glass roof to rear-end door window | Glass roof, rear, higher than rear window | mm | – | – |
BE77.20-P-1007-01A | Gap dimensions | Wind deflector to tilting/sliding roof | mm | – | – |
Tilting/sliding roof to glass roof, rear | mm | – | – | ||
Glass roof, rear, to rear window | mm | – | – | ||
Windshield to outer mounting clamp of trim strip | mm | – | – | ||
BE77.20-P-1008-01A | Gap dimensions | Mounting clips water deflector to glass roof outer edge | mm | – | – |
BE77.20-P-1009-01A | Gap dimensions | Rear glass roof for rear window | mm | – | – |
BE77.20-P-1010-01A | Height adjustment of rear glass roof to rear window | Rear glass roof higher than rear window | mm | – | – |