Check values for gap dimensions |
Number | Designation | Model 213.0/1 | Model 213.2 | ||
BE60.00-P-1001-01GA | Engine hood to fender | Dimension "A" | mm | 3 (0,5) | 3 (0,5) |
For picture, see | |||||
BE60.00-P-1002-01GA | Engine hood to headlamp | Dimension "B" | mm | 5,2 (1,5) | 5,2 (1,5) |
For picture, see | |||||
BE60.00-P-1003-01GA | Engine hood to radiator trim/soft nose | Dimension "C" | mm | 3,6 (0,8) | 3,6 (0,8) |
For picture, see | |||||
BE60.00-P-1004-01GA | Protrusion of radiator trim/soft nose, engine hood | Dimension "C" | 1 (1) | 1 (1) | |
For picture, see | |||||
BE60.00-P-1005-01GA | Engine hood to bumper | Dimension "D" | mm | 3,8 (1) | 3,8 (1) |
For picture, see | |||||
BE60.00-P-1006-01GA | Bumper to headlamp | Dimension "E" | mm | 2 (0,75) | 2 (0,75) |
For picture, see | |||||
BE60.00-P-1007-01GA | Front door to fender | Dimension "G" | mm | 3,6 (0,5) | 3,6 (0,5) |
For picture, see | |||||
BE60.00-P-1008-01GA | Front door to rear door | Dimension "H" | mm | 3,9 (0,5) | 3,9 (0,5) |
For picture, see | |||||
BE60.00-P-1009-01GA | Rear door to side section, bottom | Dimension "I" | mm | 3,3 (0,5) | 3,3 (0,5) |
For picture, see | |||||
BE60.00-P-1010-01GA | Front door cover to rear door cover | Dimension "J" | mm | 4,3 (0,75) | 4,3 (0,75) |
For picture, see | |||||
BE60.00-P-1011-01GA | Trunk lid to fender at rear, top | Dimension "K" | mm | 3,3 (0,8) | - |
For picture, see | - | ||||
BE60.00-P-1012-01GA | Taillamp to bumper | Dimension "L" | mm | 1,9 (1,0) | 2,2 (1,0) |
For picture, see | |||||
BE60.00-P-1013-01GA | Trunk lid to bumper | Dimension "M" | mm | 3,8 (1) | - |
Dimension "M1" | mm | 5,5 (1) | - | ||
For picture, see | - | ||||
BE60.00-P-1014-01GA | Rear sidewall to taillamp | Dimension "N" | mm | 1 (0,7) | 1 (0,7) |
For picture, see | |||||
BE60.00-P-1015-01GA | Fuel filler flap | Dimension "O" | mm | 2 (0,5) | 2 (0,5) |
For picture, see | |||||
BE60.00-P-1016-01GA | Rear side window to rear triangular window | Dimension "P" | mm | - | 4,6 (1,0) |
For picture, see | - | ||||
BE60.00-P-1017-01GA | Roof to rear spoiler | Dimension "Q" | mm | - | 4,9 (1,4) |
For picture, see | - | ||||
BE60.00-P-1018-01GA | Sidewall to rear spoiler | Dimension "R" | mm | - | 3,9 (1,3) |
For picture, see | - | ||||
BE60.00-P-1019-01GA | Center of liftgate to rear bumper | Dimension "U1" | mm | - | 5,5 (1,5) |
For picture, see | - | ||||
BE60.00-P-1020-01GA | Outside of liftgate to rear bumper | Dimension "U2" | mm | - | 3,8 (1,0) |
For picture, see | - | ||||
BE60.00-P-1021-01GA | Sidewall to liftgate | Dimension "S" | mm | - | 3,5 (0,8) |
For picture, see | - | ||||
BE60.00-P-1022-01GA | Outside of taillamp to inside of taillamp | Dimension "T" | mm | - | 3,8 (1,0) |
For picture, see | - | ||||