Rear axle | 746.210/213 in model 930, 934, 940, 944, 950, 954 |
Rear axle | 746.301 in model 956 |
Rear axle | 746.301 in model 963, 964 |
except code A2X (Rear axle with active lubrication, controlled) | |
except code U3I (Control code, NFD standard) | |
Rear axle | 746.302 in model 963, 964 |
Rear axle | 748.595 in model 963, 964 |
Rear axle | 771.010/011/014/015 in model 963, 964 |
Test and adjustment values for rear axle drive |
Number | Designation | Rear axle 746.210/213 in model 930, 934 | Rear axle 746.210/213 in model 940, 944 | |
BE35.30-N-1001-01N | Minimum friction torque on pinion | Nm | 7...16 | 7...16 |
BE35.30-N-1002-01N | Drive pinion mounting pretension | mm | 0,05 | 0,05 |
BE35.30-N-1003-01N | Drive shaft mounting pretension | mm | – | – |
BE35.30-N-1004-01N | Bearing unit axial play, through-drive shaft | mm | – | – |
BE35.30-N-1005-01N | Output shaft axial play | mm | – | – |
BE35.30-N-1006-01N | Gear backlash | mm | 0,22...0,30 | 0,22...0,30 |
BE35.30-N-1007-01N | Axial play for dog gearing, sliding sleeve and ring gear | mm | 1,5...2,0 | 1,5...2,0 |
Test and adjustment values for rear axle drive |
Number | Designation | Rear axle 746.210/213 in model 950, 954 | Rear axle 746.301 in model 956 | |
BE35.30-N-1001-01N | Minimum friction torque on pinion | Nm | 7...16 | 7...16 |
BE35.30-N-1002-01N | Drive pinion mounting pretension | mm | 0,05 | 0,05 |
BE35.30-N-1003-01N | Drive shaft mounting pretension | mm | – | – |
BE35.30-N-1004-01N | Bearing unit axial play, through-drive shaft | mm | – | – |
BE35.30-N-1005-01N | Output shaft axial play | mm | – | – |
BE35.30-N-1006-01N | Gear backlash | mm | 0,22...0,30 | 0,22...0,30 |
BE35.30-N-1007-01N | Axial play for dog gearing, sliding sleeve and ring gear | mm | 1,5...2,0 | 1,5...2,0 |
Test and adjustment values for rear axle drive |
Number | Designation | Rear axle 746.301 in model 963, 964 except code A2X (Rear axle with active lubrication, regulated) and except code U3I (Control code, NFD standard) | Rear axle 746.302 in model 963, 964 | |
BE35.30-N-1001-01N | Minimum friction torque on pinion | Nm | 7...16 | 8...15 |
BE35.30-N-1002-01N | Drive pinion mounting pretension | mm | 0,05 | 0,05 |
BE35.30-N-1003-01N | Drive shaft mounting pretension | mm | – | 0,00...0,04 |
BE35.30-N-1004-01N | Bearing unit axial play, through-drive shaft | mm | – | 0,00...0,03 |
BE35.30-N-1005-01N | Output shaft axial play | mm | – | 0,01...0,04 |
BE35.30-N-1006-01N | Gear backlash | mm | 0,22...0,30 | 0,22...0,30 |
BE35.30-N-1007-01N | Axial play for dog gearing, sliding sleeve and ring gear | mm | 1,5...2,0 | 1,5...2,0 |
Test and adjustment values for rear axle drive |
Number | Designation | Rear axle 748.595 in model 963, 964 | Rear axle 771.010/014 in model 963, 964 | |
BE35.30-N-1001-01N | Minimum friction torque on pinion | Nm | 11...22 | 5...13 |
BE35.30-N-1002-01N | Drive pinion mounting pretension | mm | - | – |
BE35.30-N-1003-01N | Drive shaft mounting pretension | mm | – | 0,00...0,04 |
BE35.30-N-1004-01N | Bearing unit axial play, through-drive shaft | mm | – | 0,03...0,06 |
BE35.30-N-1005-01N | Output shaft axial play | mm | – | 0,01...0,04 |
BE35.30-N-1006-01N | Gear backlash | mm | 0,25...0.33 | 0,20...0,28 |
BE35.30-N-1007-01N | Axial play for dog gearing, sliding sleeve and ring gear | mm | 1,5...2,0 | 1,5...2,0 |
Test and adjustment values for rear axle drive |
Number | Designation | Rear axle 771.011/015 in model 963, 964 | |
BE35.30-N-1001-01N | Minimum friction torque on pinion | Nm | 5...13 |
BE35.30-N-1002-01N | Drive pinion mounting pretension | mm | 0,3...0,5 |
BE35.30-N-1003-01N | Drive shaft mounting pretension | mm | – |
BE35.30-N-1004-01N | Bearing unit axial play, through-drive shaft | mm | – |
BE35.30-N-1005-01N | Output shaft axial play | mm | 0,01...0,04 |
BE35.30-N-1006-01N | Gear backlash | mm | 0,20...0,28 |
BE35.30-N-1007-01N | Axial play for dog gearing, sliding sleeve and ring gear | mm | 1,5...2,0 |