MODEL | 460, 461 with TRANSFER CASE 750.60 |
MODEL | 461, 463 with TRANSFER CASE 750.65 |
Test values for transfer case gear set, shafts |
Number | Designation | MODEL 460, 461 with TRANSFER CASE 750.60 | MODEL 461, 463 with TRANSFER CASE 750.65 | |
BE28.50-P-1001-01A | Axial play of drive wheels on output shaft | mm | 0,07 (0,03) | – |
BE28.50-P-1002-01A | Axial play of drive wheel on input shaft | mm | 0,25 (0,15) | – |
BE28.50-P-1003-01A | Axial play on front tapered roller bearing in rear axle output shaft | mm | 0 (0,025) | – |
BE28.50-P-1004-01A | Axial play on outer tapered roller bearing in rear axle output shaft | mm | 0,06 (0,01) | – |
BE28.50-P-1005-01A | Friction torque in rear axle output shaft | Nm | 0,8...1,25 | – |
BE28.50-P-1006-01A | Bore diameter, oil distributor on output shaft | mm | 28,13 | – |
BE28.50-P-1007-01A | Oil pressure relief valve | bar | 0,4 | – |
BE28.50-P-1008-01A | Axial play of carrier ring on drive shaft | mm | 0,25 (0,15) | – |
BE28.50-P-1009-01A | Play between shift rod and system | mm | 0,2 | – |
BE28.50-P-1010-01A | Total concentricity deviation at flange | mm | 0,07 | – |
BE28.50-P-1011-01A | Play between shift finger and stop plate | mm | 0,2 | – |
BE28.50-P-1012-01A | Preload of tapered roller bearing of counter shaft and input shaft | mm | – | 0,1 (0,05) |
BE28.50-P-1013-01A | Preload of tapered roller bearing of differential | mm | – | 0,1 (0,05) |
BE28.50-P-1014-01A | Axial bearing play in bearing cover | mm | – | 0...0,1 |
BE28.50-P-1015-01A | Axial bearing play in transmission cover | mm | – | 0...0,1 |
BE28.50-P-1016-01A | Friction torque of complete differential | Nm | – | 20...40 |
BE28.50-P-1017-01A | Wear limit of synchronizer cone | mm | – | 1 |