MODEL | 124, 129, 140, 163, 170, 199, 201, 202, 208, 210, 211, 215, 220, 230, 240 |
Rear axle differential housing |
Number | Designation | MODEL 124 | MODEL 129 | |||
BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | 50 | 50 | |
Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
Stage 2 | ° | 45 | 45 | |||
BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | 150 | – | ||
BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 30 | ||
BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | 20 | 20 | ||
BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | – | – | ||
BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | – | – | ||
BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | – | – | ||
BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | – | – | |
Stage 2 | ° | – | – | |||
BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | – | – | ||
BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | – | – | ||
BA35.31-P-1013-02A | Fitting to threaded insert | Nm | – | – | ||
BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | – | – | ||
BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | – | – | ||
BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | – | – | |||
BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | – | – | ||
BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | – | – | ||
BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | – | – |
Rear axle differential housing |
Number | Designation | MODEL 140 | MODEL 163 | |||
BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | 50 | – | |
Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | – | ||
Stage 2 | ° | 45 | – | |||
BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | – | – | ||
BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 30 | – | ||
BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | 20 | – | ||
BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | – | – | ||
BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | – | – | ||
BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | – | – | ||
BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | – | – | |
Stage 2 | ° | – | – | |||
BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | – | – | ||
BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | – | – | ||
BA35.31-P-1013-02A | Fitting to threaded insert | Nm | – | – | ||
BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | – | – | ||
BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | – | – | ||
BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | – | – | |||
BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | – | – | ||
BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | – | – | ||
BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | – | – |
Rear axle differential housing |
Number | Designation | MODEL 170 | MODEL 199 | |||
BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | – | 40 | |
Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | – | ||
Stage 2 | ° | 45 | – | |||
BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | – | ||
BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | – | ||
BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | – | – | ||
BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 25 | ||
BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | – | – | ||
BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | – | – | ||
BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | – | – | ||
BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | – | – | ||
BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | – | – | |
Stage 2 | ° | – | – | |||
BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | – | 17 | ||
BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | – | – | ||
BA35.31-P-1013-02A | Fitting to threaded insert | Nm | – | – | ||
BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | – | – | ||
BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | – | – | ||
BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | – | – | |||
BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | – | – | ||
BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | – | – | ||
BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | – | – |
Rear axle differential housing |
Number | Designation | MODEL 201 | MODEL 202 | |||
BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | 50 | 50 | |
Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
Stage 2 | ° | 45 | 45 | |||
BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | – | 150 | ||
BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 25 | ||
BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | – | – | ||
BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | – | – | ||
BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | – | – | ||
BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | – | – | ||
BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | – | – | |
Stage 2 | ° | – | – | |||
BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | – | – | ||
BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | – | – | ||
BA35.31-P-1013-02A | Fitting to threaded insert | Nm | – | – | ||
BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | – | – | ||
BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | – | – | ||
BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | – | – | |||
BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | – | – | ||
BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | – | – | ||
BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | – | – |
Rear axle differential housing |
Number | Designation | MODEL 208 | MODEL 210 | |||
BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | – | 50 | |
Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
Stage 2 | ° | 45 | 45 | |||
BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | – | 150 | ||
BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 25 | 30 | ||
BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | – | 20 | ||
BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | – | – | ||
BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | – | – | ||
BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | – | – | ||
BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | – | – | |
Stage 2 | ° | – | – | |||
BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | – | – | ||
BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | – | – | ||
BA35.31-P-1013-02A | Fitting to threaded insert | Nm | – | – | ||
BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | – | – | ||
BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | – | – | ||
BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | – | – | |||
BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | – | – | ||
BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | – | – | ||
BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | – | – |
Rear axle differential housing |
Number | Designation | MODEL 211 | MODEL 215 | |||
BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | – | – | |
Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
Stage 2 | ° | 45 | 45 | |||
BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | – | – | ||
BA35.31-P-1005-02A | Breather, rear axle differential | Nm | – | 30 | ||
BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | – | – | ||
BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | 35 | – | ||
BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | 25 | – | ||
BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | 30 | – | ||
BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | – | – | |
Stage 2 | ° | – | – | |||
BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | – | – | ||
BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | – | – | ||
BA35.31-P-1013-02A | Fitting to threaded insert | Nm | – | – | ||
BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | – | – | ||
BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | – | – | ||
BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | – | – | |||
BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | – | – | ||
BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | – | – | ||
BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | – | – |
Rear axle differential housing |
Number | Designation | MODEL 220 | MODEL 230 except CODE P99 | |||
BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | – | – | |
Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
Stage 2 | ° | 45 | 45 | |||
BA35.31-P-1002-02A | Oil filler screw, differential | Nm | 50 | 50 | ||
BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | 50 | 50 | ||
BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | – | – | ||
BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 30 | 30 | ||
BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | – | – | ||
BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | – | 37 | ||
BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | – | – | ||
BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | – | – | ||
BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | – | – | |
Stage 2 | ° | – | – | |||
BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | – | – | ||
BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | – | – | ||
BA35.31-P-1013-02A | Fitting to threaded insert | Nm | – | – | ||
BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | – | – | ||
BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | – | – | ||
BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | – | – | |||
BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | – | – | ||
BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | – | – | ||
BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | – | – |
Rear axle differential housing |
Number | Designation | MODEL 230 with CODE P99 | MODEL 240 | |||
BA35.31-P-1001-02A | Bolt, end cover to rear axle differential | Bolt+washer | Nm | – | – | |
Flange bolt (TORX, internal serrations) | Stage 1 | Nm | 30 | 30 | ||
Stage 2 | ° | 45 | 45 | |||
BA35.31-P-1002-02A | Oil filler screw, differential | Nm | – | 50 | ||
BA35.31-P-1003-02A | Oil drain screw for rear axle differential | Nm | – | 50 | ||
BA35.31-P-1004-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Nm | – | – | ||
BA35.31-P-1005-02A | Breather, rear axle differential | Nm | 30 | 25 | ||
BA35.31-P-1006-02A | Bolt, side bearing cap to rear axle center assembly | Nm | – | – | ||
BA35.31-P-1007-02A | Bolt, heat sink to end cover | Nm | – | – | ||
BA35.31-P-1008-02A | Rear axle differential breather to end cover | Nm | – | – | ||
BA35.31-P-1009-02A | Rear axle differential breather to rear axle housing | Nm | – | – | ||
BA35.31-P-1010-02A | Locking bolt, vibration damper and rear axle housing to rear axle carrier | Stage 1 | Nm | – | – | |
Stage 2 | ° | – | – | |||
BA35.31-P-1011-02A | Oil temperature sensor for rear axle center assembly | Nm | – | – | ||
BA35.31-P-1012-02A | Threaded insert to differential transmission housing | Nm | 50 | – | ||
BA35.31-P-1013-02A | Fitting to threaded insert | Nm | 40 | – | ||
BA35.31-P-1014-02A | Union nut, oil hose to fitting | Nm | 35 | – | ||
BA35.31-P-1015-02A | Union nut for oil hose to oil pump | Nm | 35 | – | ||
BA35.31-P-1016-02A | Banjo bolt for oil hose to oil pump | 25 | – | |||
BA35.31-P-1017-02A | Banjo bolt, oil hose to threaded inserted | Nm | 25 | – | ||
BA35.31-P-1018-02A | Banjo bolt for oil hose to oil cooler | Nm | 20 | – | ||
BA35.31-P-1019-02A | Temperature switch to end cover for differential transmission | Nm | 30 | – |