W82.85-1449-11
1 Insert installation frame for FleetBoard vehicle computer (4) into upper slot of assembly frame (dual DIN slot) (3).
The installation frame for the FleetBoard vehicle computer (4) latches automatically into the assembly frame (dual DIN slot) (3).
W82.85-1528-11
2 Install bracket (9).
The bracket (9) is bolted through the headliner from below.
3 Install mounting frame (10).
W82.85-1529-11
4 Clip cover (11) onto mounting frame.
5 Slide assembly frame (dual DIN slot) (3) into mounting frame.
Insert the assembly frame (dual DIN slot) (3) into the mounting guides (arrows). The assembly frame (dual DIN slot) (3) must latch into the mounting frame.
6 Route GPS antenna line (5), GSM antenna line (6) and the wiring harness for the FleetBoard with FleetBoard connector (X126) through the upper slot of the assembly frame (dual DIN slot) (3).
7 Connect the FleetBoard vehicle computer wiring harness (8) to the FleetBoard connector (X126).
8 Cut GPS antenna line (5) and GSM antenna line (6) to the length of the wiring harness for the FleetBoard vehicle computer (8) and fasten to the electrical lines using cable ties on either side of FleetBoard connector (X126).
W82.85-1580-11
9 Connect GPS antenna line (5) and GSM antenna line (6) to FleetBoard vehicle computer (2).
Pay attention to color coding.
10 Connect FleetBoard vehicle computer connector (P502) of FleetBoard vehicle computer wiring harness (8) to FleetBoard vehicle computer (2).
The designation of the FleetBoard vehicle computer connector (P502) is found on both the wiring harness for the FleetBoard vehicle computer (8) and the FleetBoard vehicle computer (2).
11 Slide FleetBoard vehicle computer (2) into assembly frame.
Ensure FleetBoard vehicle computer (2) is correctly latched in assembly frame.