We differentiate between two types of cavity preservation: |
A | Cavity preservation in bead area |
B | Inner surface, cavities and gaps |
P97.20-2542-01
Engine hood |
S97.20-4508-05
Liftgate |
S97.20-4509-11
Left rear door |
S97.20-4510-12
Right rear door |
S97.20-4511-03
Front door |
S97.20-4512-11
Sliding door |
S97.20-4513-03
Front longitudinal member |
S97.20-4514-11
S97.20-4515-09
Upper front longitudinal member, A-pillar,m side wall paneling, lower side longitudinal member |
S97.20-4516-09
Upper front longitudinal member, A-pillar, B-pillar, side wall paneling, right lower side longitudinal member |
Rear end |
S97.20-4517-06
S97.20-4518-09
Underbody |
Picture no., etc. | Work notes | ||
Danger | Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents | Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection. | |
Topical note | Notes on cavity preservation | ||
A | Cavity preservation in bead area | Apply from inside with hook nozzle. Apply cavity preservation with spraying hose and nozzle (spraying angle 360°) as far as possible into cavities. | |
Cavity preservation (free of solvents), 1 liter | |||
B | Inner surface, cavities and gaps | Uniformly moisten with cavity preservation. |