Differences in cavity preservation |
A | Folding areas and cavities |
B | Inside areas and gaps |
P97.20-2542-01
Cavity preservation on hood, shown on model 177.0 |
P97.20-2775-05
Cavity preservation on fender, shown on model 177.0 |
P97.20-2778-06
Cavity preservation on front door, shown on model 177.0 |
P97.20-2774-06
Cavity preservation on rear door, shown on model 177.0 |
P97.20-2773-06
Cavity preservation on the liftgate, shown on model 177.0 |
P97.20-2777-06
Cavity preservation on front end-assembly at the front, shown on model 177.0 |
P97.20-2782-06
Cavity preservation on the side front-end assembly on the inside and outside, shown on model 177.0 |
P97.20-2781-06
P97.20-2772-08
Cavity preservation on front top longitudinal member, A-pillar, B-pillar, sidewall paneling, and on side longitudinal member, shown on model 177.0 |
Cavity preservation on rear wheel well and on rear bottom longitudinal member, shown on model 177.0 |
P97.20-2779-06
Cavity preservation on rear area, shown on model 177.0 |
P97.20-2776-06
Cavity preservation on underbody, shown on model 177.0 |
P97.20-2780-06
Picture no., etc. | Work notes | ||
Danger | Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents | Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection. | |
Topical note | Notes on cavity preservation | ||
A | Cavity preservation in folding areas and hollow cavities. | ||
| |||
Commercially available devices/tools | |||
Install from inside through openings (arrows) with hook probe. | |||
Cavity preservation (free of solvents), 1 liter | |||
B | Cavity preservation for inner areas and gaps. | ||
| |||
Commercially available devices/tools | |||
Uniformly moisten cavity preservation. | |||
Cavity preservation (free of solvents), 1 liter |