Cavity preservation following repair work

AR97.20-P-1500LF

Cavity preservation following repair work

09.03.2020

Model

217, 222

The following differentiation is made for cavity preservation:

A

Cavity preservation in crimping area

B

Inner surface, cavities and gaps

Engine hood, shown on model 222.0

Liftgate, MODEL 222.0

Front fender, shown on MODEL 222.0

Front door, shown on MODEL 222.0

Rear door MODEL 222.0

Front longitudinal member, shown on model 222.0

Upper front longitudinal member, A-pillar, B-pillar, C-pillar, side wall paneling and bottom side longitudinal member, shown on MODEL 222.0

Rear longitudinal member, shown on model 222.0

Rear area, shown on model 222.0

Underfloor, shown on model 222.0

Picture no., etc.

Work notes

 Danger

Risk of explosion and poisoning caused by solvent vapors and gasses. Risk of injury to skin and eyes when working with anticorrosion agents

Never spray corrosion protection on flames or hot, glowing objects and keep them well away from all potential sources of ignition. Use them only in well-ventilated rooms; wear respiratory protection.

AS97.00-Z-0001-01A

Topical note

Notes on cavity preservation

AH97.20-P-0001-01B

A

Cavity preservation in crimping area

 Model 217
Cavity preservation is not required for liftgate consisting of plastic.

 Model 222
Install from inside through openings (arrows) with hook probe. Apply cavity preservation with spraying hose and nozzle (spraying angle 360°) as far as possible into cavities.

Cavity preservation (free of solvents), 1 liter

*BR00.45-Z-1003-05A

B

Inner surface, cavities and gaps

 Model 217
Cavity preservation is not required for liftgate consisting of plastic.

 Model 222
Uniformly moisten cavity preservation.

Cavity preservation (free of solvents), 1 liter

*BR00.45-Z-1003-05A

Repair materials

Number

Designation

Order number

BR00.45-Z-1003-05A

Cavity preservation (free of solvents), 1 liter

A 000 986 72 70 10