Seam sealing following repair, front end damage

AR97.10-D-4000-01TSA

Seam sealing following repair, front end damage

Model

910

Repair materials

Number

Designation

Order number

BR00.45-Z-1003-01A

White sealing compound, 310 ml, DBL 6069.20

A 001 989 63 20

BR00.45-Z-1041-01A

Seam sealant, sprayable 310 ml

A 002 989 84 20

1

Seal body flanges of repaired area with sealant and spot welds and rivets of repaired area with seam sealant material.

 Seal repaired body flanges and reset spot welds and rivets.
Leaks and corrosion can otherwise occur.

 Use appropriate processing variant for seam seals.

 Insert plastic plugs and rubber grommets with sealant.

 Observe standard sealing. Seal only primed body parts.

 Keep sealant out of threads on weld nuts and threaded pins by masking off or covering with cardboard sleeves. Also keep drain openings and contact surfaces of affected axle attachments, detachable parts and glass panes free from sealant. Seal accessible spot weld flanges on both sides. Where only accessible from one side, only seal accessible area.

Processing variants for seam seals

A

Pulling or wiping off

B

Sealing or smoothing

Front area, shown view from left

Front area, shown view from right

Wheel well area, shown view from bottom left

Entrance area, shown on left side of vehicle

Entrance area of vehicle interior, shown on left and right

Side front area, shown on left side of vehicle

underbody area