AR94.30-P-5300M | Remove/install bottom parts of noise encapsulation | 16.11.01 |
MODEL 220 with ENGINE 613, 628, 648
P94.30-2013-06
1 Sound-proofing capsule bottom section, right
2 Sound-proofing capsule bottom section, left
3 Sound-proofing capsule bottom section, center
4 Sound-proofing capsule bottom section, rear
5 Screw
| Remove | ||
Danger! | Lethal injuries are possible if vehicle slips off of lifting platform | Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer. | |
1 | Raise vehicle with lifting platform | ||
2 | Unscrew screws (5) and remove sound-proofing capsule bottom sections (1, 2, 3, 4) | Observe removal sequence of paneling parts: First remove center paneling section (3). | |
| Install | ||
3 | Install sound-proofing capsule bottom sections (1, 2, 3, 4). | Install right and left front sound-proofing capsule bottom section (1, 2), so that their rubber lip is covered by bumper. |