AR91.60-W-0624B | Remove/install restraint systems control unit | 12.9.11 |
MODEL 940.###, 942.###, 943.###, 944.### #L up to 489809 with BODY 944.890 with CODE (SA5) Driver airbag
MODEL 944 with BODY 944.899 with CODE (SA5) Driver airbag
MODEL 950.###, 952.###, 953.###, 954.### #L up to 489809 with BODY 940.890 with CODE (SA5) Driver airbag
MODEL 950, 952, 953, 954 with BODY 940.899 with CODE (SA5) Driver airbag
MODEL 970.###, 972.###, 974.###, 975.###, 976.### #L up to 489809 with BODY 972.890 with CODE (SA5) Driver airbag
MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (SA5) Driver airbag
W91.60-1030-06
1 Plug
2 Electrical connector
A40 Supplemental restraint system (SRS)
Modification notes
| Remove/install | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Disconnect ground lead from battery | ||
2 | Remove cable cover in footwell on driver side | ||
3 | Release and disconnect electrical connector (2) at supplemental restraint system (SRS) control unit (A40) | ||
4 | Remove supplemental restraint system (SRS) control unit (A40) | Installation: The arrow on the housing of the supplemental restraint system (SRS) control unit (A40) must point in the direction of travel. | |
5 | Install in the reverse order | ||
6 | Parameterize supplemental restraint system (SRS) control unit (A40) with Star Diagnosis | Only if supplemental restraint system (SRS) control unit (A40) was replaced. |