Remove/install airbag unit on steering wheel

AR91.60-P-0660Q

Remove/install airbag unit on steering wheel

25.04.2018

Model

209

1

Bolts

3

Electrical connector

R12/14

Driver airbag ignition squib 2

2

Driver airbag

R12/13

Driver airbag ignition squib 1

 Warning

Risk of injury during testing and repair operations related to pyrotechnical components

Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.

AS91.00-Z-0008-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Information, assessment and legal requirements when working with, handling and storing pyrotechnical components

AH91.00-Z-0000-10A

 

Remove/install

1

Switch on ignition and store transmitter key outside of transmission range (min. 2 m)

2

Disconnect battery ground line

AR54.10-P-0003Q

3

Remove bolts (1)

 Bolt, airbag to steering wheel

*BA91.60-P-1001-01A

 Screwdriver bit

*126589001000

4

Release and disconnect electrical connection (3)

5

Lift driver airbag (2) and release and disconnect electrical connectors from driver airbag squib 1 (R12/13) and driver airbag squib 2 (R12/14)

 Removal lever

*203589043300

6

Remove driver airbag (2)

7

Install in the reverse order



Check

8

Check and erase vehicle fault memory using the diagnostic system

When replacing the driver airbag (2).



AD00.00-P-2000-04A

 Airbag

Number

Designation

Model 209.3

Model 209.4

BA91.60-P-1001-01A

Bolt, airbag to steering wheel

Nm

8

8