AR91.29-W-1500B | Remove/install seat control module | 21.4.97 |
MODELS 950, 952, 953, 954
with CODE (SG2) "Isringhausen" standard passenger suspension seat
with CODE (SG5) "Isringhausen" standard driver suspension seat
MODELS 970, 972, 974, 975, 976
with CODE (SG2) "Isringhausen" passenger standard suspension seat
with CODE (SG5) "Isringhausen" standard driver suspension seat
W91.29-0011-06
1 Screw
2 Ground cable
3 Module support
4 Nut
5 Serrated washer
6 Connector
7 Boot
A8 Driver-side suspension seat control module
A34 Front passenger side suspension seat control module
Modification notes
| Remove, Install | ||
1 | Switch off ignition | ||
2 | Remove seat cushion | ||
3 | Work loose CV boot (7) at top | Move seat to highest position and secure it from being lowered. Move seat inclination to highest position. | |
4 | Disconnect plug connector (6) | ||
5 | Unscrew nut (4) | The nut is located on the underside of the module support (3). | |
Installation: Use new toothed lock washer (5). | |||
6 | Undo screws (1) and remove suspension seat control module (A8/A34) | Push module support (3) downwards and remove suspension seat control module. | |
Installation: when replacing the control module, the ground lead (2) of the plug (6) to the seat frame must be retrofitted if it is not already there. | |||
7 | Install in the reverse order |