ar9116p177002lca
Remove/install middle head restraint of rear bench seat
ประเภท ar · หัวข้อ 91.16 · เวอร์ชัน 0101 · 2019-10-02
ใช้กับ: Model 222.0/1 except code 223 (Electric backrest adjustment and head restraints) except code 224 (Rear individual seat design)
ไม่มีใน “th” แสดงเป็น อังกฤษ
ตำแหน่ง
กลุ่มฟังก์ชัน 3 Body › 91 Seats, bunks, restraint systems › 91.16 Head restraints — ซีรีส์ 222 (รุ่น 0**, 1**)
EinPAS 37 Interior equipment › 37.27 Rear seat › 37.27.42 Seat backrest/head restraint — ซีรีส์ 222 (รุ่น 0**, 1**)
AR91.16-P-1770-02LCA
| Remove/install middle head restraint of rear bench seat
|
|
|
Model
| 222.0/1
|
|
| except code 223 (Electric backrest adjustment and head restraints)
|
|
| except code 224 (Rear individual seat design)
|
Remove/install
3
| Release cover (5) (arrows) and open.
|
|
| Installation: Make sure that the electrical line of the center head restraint (1) is routed correctly.
|
4
| Disconnect electrical connector (6).
|
5
| Allow electrical line with connector (6.1) to hang down vertically.
|
6
| Pull unlocking stirrup (7) in forward direction until end stop.
|
|
| Installation: Unlocking stirrup (7) must audibly latch.
|
7
| Remove center head restraint (1).
|
|
| Guide the electrical line with connector (6.1) through the head restraint guide.
|
8
| Install in the reverse order.
|
