Shown on left side of vehicle |
1 | Seat backrest |
2 | Seat cushion |
3 | Center belt guide |
4 | Outer belt guide |
5 | Outer seat belt |
6 | Center seat belt |
P91.12-3680-11
P91.12-3681-07
Shown on left side of vehicle |
1 | Seat backrest | 9 | Screw | |
7 | Screw for belt buckle | 10 | Screw | |
8 | Seat belt buckle |
P91.12-3682-07
Shown on left side of vehicle |
1 | Seat backrest | 14 | Electrical connector | |
12 | Cover | 15 | Electrical connector | |
13 | Damping material |
| Remove/install | ||
1 | Remove seat cushion (2) | ||
2 | Remove outer belt guide (4) from seat backrest (1) and place outer seat belt (5) to one side | Press outer belt guide (4) in pivot point (arrow E) up to end stop in the backrest (1), then rotate through 90° to one side and pull upwards out of the backrest (1). | |
3 | Remove center belt guide (3) from backrest (1) and place center seat belt (6) to one side | When removing left backrest (1). | |
Press center belt guide (3) in pivot point (arrow D) up to end stop in backrest (1), then rotate through 90° to one side and remove upwards out of backrest (1). | |||
4 | Remove belt buckle screw/bolt (7) | Installation: Ensure that belt buckle (8) is seated correctly. Pay attention to the correct installation position of the center seat belt (6). | |
Bolt/nut for rear belt buckle | |||
5 | Remove screw/bolts (9, 10) | Bolt, backrest to body | |
6 | Fold backrest (1) forward | ||
7 | Fold up cover (12) | ||
8 | Fold over damping material (13) | ||
9 | Disconnect electrical connectors (14, 15) | The number of electrical connectors (14, 15) differs depending on the vehicle equipment. | |
10 | Remove backrest (1) from vehicle | | |
11 | Install in the reverse order |