Remove/install level control for seat height adjustment · ar9110w3410b · Mercedes-Benz WIS

AR91.10-W-3410B

Remove/install level control for seat height adjustment

9.7.98

MODELS 950.###, 952.###, 953.###, 954.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer"comfort passenger suspension seat

MODELS 970.###, 972.###, 974.###, 975.###, 976.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort passenger suspension seat

Remove/install level control for seat height adjustment

W91.10-1013-06

1 Gaiter plug

2 Boot

3 Level control

4 Belt

5 Bowden cable (seat height adjustment)

6 Bowden cable (rapid seat lowering)

7 Screw

8 Nut

9 Compressed-air line (to the pneumatic spring unit)

10 Compressed-air line (control line)

11 Compressed-air line (compressed air reserve)

12 Compressed-air line (vent line)

 	Remove/install
1	Remove seat cushion		AR91.10-W-3310D
2	Remove gaiter plug (1) and lay CV boot (2) downward	 Move seat into lowest position.
3	Unscrew screws (7)	 Slowly roll up belt (4).
4	Unscrew nuts (8) from below	 Tip seat to the side.
		 Models 950, 952, 953, 954	*BA91.10-N-1003-02A
		 Models 970, 972, 974, 975, 976	*BA91.10-N-1002-02B
5	Detach Bowden cable (5 and 6) at the level control (3) at the bottom
6	Disconnect compressed-air lines (9 to 12)	 Identify compressed-air lines.
7	Remove level control (3)
8	Install in the reverse order

 Seats

Number	Designation		MODELS 950.5/6, 952.5/6, 953.6, 954.5 with CODE SH1, SH2 up to VIN 516 699	MODELS 950.0/1/2/3, 952.0/1/2/3, 953.1/3, 954.0/1/2 with CODE SH1, SH2 up to VIN 516 699


BA91.10-N-1003-02A	Nut for level control to rocker	Nm	25	25

 Seats

Number	Designation		MODELS 970, 972, 974, 975, 976 with CODE SH1, SH2 up to VIN 516 699


BA91.10-N-1002-02B	Nut for level control to rocker	Nm	25

เอกสารที่อ้างถึง

ar9110w3310d