AR91.10-W-3380C | Remove/install vertical shock absorber for seat springing | 9.7.98 |
MODELS 950.###, 952.###, 953.###, 954.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer"comfort passenger suspension seat
MODELS 970.###, 972.###, 974.###, 975.###, 976.### ## up to 516699
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort passenger suspension seat
W91.10-1010-06
1 Gaiter plug
2 Boot
3 Level control
4 Belt
5 Bowden cable (seat height adjustment)
6 Bowden cable (rapid seat lowering)
7 Screw
8 Nut
9 Bowden cable (vertical shock absorber)
10 Circlip, upper
11 Circlip, lower
12 Vertical shock absorber
| Remove/install | ||
1 | Remove seat cushion | ||
2 | Remove gaiter plug (1) and lay CV boot (2) downward | Move seat into lowest position. | |
3 | Unscrew screws (7) | Slowly roll up belt (4). | |
4 | Unscrew nuts (8) from below and lift out level control (3) | Tip seat to the side | |
Models 950, 952, 953, 954 | |||
Models 970, 972, 974, 975, 976 | |||
5 | Detach Bowden cables (5 and 6) from the level control (3) | ||
6 | Remove upper circlip (10) and detach Bowden cable (9) at the vertical shock absorber (12) | ||
7 | Remove lower circlip (11) and remove vertical shock absorber (12) | Installation: lettering/imprint must face upward. | |
8 | Install in the reverse order |
Seats
Number | Designation | MODELS 950.5/6, 952.5/6, 953.6, 954.5 | MODELS | |
BA91.10-N-1003-02A | Nut for level control to rocker | Nm | 25 | 25 |
Seats