AR91.10-W-3350C | Remove/install Bowden cable for horizontal suspension | 22.11.00 |
MODEL 375.1
with CODE (SC2) Standard co-driver suspension seat "Grammer"
with CODE (SC5) Standard driver suspension seat "Grammer"
MODEL 375.3
with CODE (SC2) Standard co-driver suspension seat "Grammer"
with CODE (SC5) Standard driver suspension seat "Grammer"
MODEL 950.###, 952.###, 953.###, 954.### ## as of 516700
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer"comfort passenger suspension seat
with CODE (SH6) "Grammer" deluxe driver suspension seat with horizontal springing
MODEL 930, 932, 933, 934
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer"comfort passenger suspension seat
with CODE (SH6) "Grammer" deluxe driver suspension seat with horizontal springing
with CODE (SS1) Luxury driver suspension seat, leather, "Grammer"
with CODE (SS2) Luxury front passenger suspension seat, leather, "Grammer"
MODEL 970.###, 972.###, 974.###, 975.###, 976.### ## as of 516700
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer" comfort passenger suspension seat
MODEL 375.4
with CODE (SC2) Standard co-driver suspension seat "Grammer"
with CODE (SC5) Standard driver suspension seat "Grammer"
MODEL 944
with CODE (SH1) "Grammer" comfort driver suspension seat
with CODE (SH2) "Grammer"comfort passenger suspension seat
with CODE (SH6) "Grammer" deluxe driver suspension seat with horizontal springing
W91.10-1051-06
1 Bowden cable
2 Circlip
3 Upper part of suspension
4 Bracket
5 Relay lever
6 Lockout device
7 Seat frame
| Remove/Install | ||
1 | Remove lower side paneling on the front seat | ||
2 | Bring seat into uppermost position, and secure | ||
3 | Remove tie strap at Bowden cable (1) | Identify tie strap attaching points. Installation: Install new tie straps at the places marked. | |
4 | Press lock (6) against the spring load direction of the Bowden cable (1) and detach Bowden cable | ||
5 | Remove circlip (2) and detach Bowden cable (1) from the upper part of suspension (3) | ||
6 | Pull Bowden cable (1) out of the bore in the seat frame (7) | ||
7 | Remove Bowden cable (1) from the bracket (4) and detach at the relay lever (5) | ||
8 | Install in the reverse order |