W91.10-1262-09
1 Pneumatic connector
2 Screw
4 Bolts
3 Seat
| Remove/install | ||
1 | Push back seat (3) to the full extent | ||
2 | Remove bolts (2) on the seat rails | | |
3 | Push forward seat (3) to the full extent | ||
4 | Remove bolts (4) on the seat rails | | |
5 | Remove cable tie and disconnect pneumatic connector (1) | Only on vehicles with suspension seat. To do so, fold seat (3) towards rear and secure against falling forwards. | |
Installation: Install new cable ties. | |||
6 | Remove seat (3) | ||
7 | Install in the reverse order |
Front seats