AR88.80-W-5100A | Remove/install windshield wiper linkage cover | 9.9.97 |
MODEL 375.4 with BODY 375.840
MODEL 944 with BODY 944.899
MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899
MODEL 970, 972, 974, 975, 976 with BODY 972.899
W88.80-0004-09
Shown on model 970
5 Screw
6 Nut
7 Hose line
1 Cap
2 Screw
3 Handle
4 Windshield wiper linkage cover
| Removal/installation | ||
1 | Remove wiper arms | ||
2 | Remove front flap | ||
3 | Remove wind guides on right and left of front end pillar | ||
4 | Remove right and left covers from front end pillar | ||
5 | Remove caps (1) from handles (3) | ||
6 | Remove handle (3) | Body 375.840, 944.899 | |
Body 940.899, 972.899 | |||
7 | Disconnect hose line (7) on connection element from windshield wiper linkage cover (4) | ||
8 | Unscrew nuts (6) and remove windshield wiper linkage cover (4) | Check rear of windshield wiper linkage cover for proper state, replace if necessary. | |
9 | Install in the reverse order |
Windshield wiper
Number | Designation | Body 375.840 in model 375.4 | Body | Body | |
BA82.30-N-1008-01B | Screw for handle and wiper linkage cover on firewall | Nm | 18 | 18 | 18 |
Windshield wiper