P88.80-2104-06
1 Paneling
2 Screw
3 Clip
4 Retaining clips
6 Retaining rail
P88.80-2105-09
1 Paneling
6 Retaining rail
5 Lock
| Remove/Install | ||
1 | Completely open Vario roof with soft top switch | See Operator's Manual | |
2 | Remove bolt (2). | ||
3 | Carefully unclip paneling (1) with retaining rail (6) from clips (3) and retaining clips (4) from A-pillar | Unclip paneling (1) carefully, danger of damaging paneling (1). | |
| |||
Installation: Carefully press paneling (1) to A-pillar. Danger of damaging paneling (1) | |||
Installation: Replace damaged clips (3). Ensure that paneling (1) is seated properly on A-pillar | |||
4 | Remove paneling (1) with retaining rail (6) from A-pillar | Installation: Ensure that guide (arrow) is seated correctly on front fender | |
5.1 | Turn locks (5) until paneling (1) can be removed from retaining rail (6) | Only when replacing paneling (1) or retaining rail (6). | |
Installation: Replace locks (5). | |||
6 | Remove paneling (1) from retaining rail (6) | ||
7 | Install in the reverse order |
Mounting wedge
110 589 03 59 00