MODEL | 374.5 with BODY 374.860 |
MODEL | 374.6 with BODY 374.870 |
MODEL | 374.6, 940, 942, 943, 944 with BODY 944.890 |
MODEL | 375.1 with BODY 375.850 |
MODEL | 375.3 with BODY 375.820 |
MODEL | 375.4 with BODY 375.860 |
MODEL | 950.5/6, 952.5/6, 953.6, 954.5 with BODY 940.890 |
MODEL | 970, 972, 974, 975, 976 with BODY 972.890 |
W88.70-1009-09
1 | Electrical wiring harness | 6 | Screw | 11 | Clamp | ||
2 | Electrical connector | 7 | Cover | 12 | Screw | ||
3 | Cover | 8 | Electrical connector | 13 | Curb mirror | ||
4 | Cover | 9 | Screw | 14 | Rubber base | ||
5 | Mirror arm | 10 | Exterior rearview mirrors | 15 | Wide-angle rearview mirror |
| Remove/install | ||
1 | Remove door trim | ||
2 | Remove wiring harness (1) | The electrical wiring harness (1) can be fastened with a holder on the inner door panel or with a cable tie directly on the inner door panel depending on the version. | |
3 | Disconnect electrical connector (2) | ||
4 | Remove cover (3) | Installation: Observe correct arresting. | |
5 | Remove cover (4) | Installation: Observe correct arresting. | |
6 | Remove screw/bolts (6) | Bolt for mirror holder on door, model 374.5/6, 375.3/4, 940.1/2/3, 942.1/3, 943.1/3, 944, 950.5/6, 952.5/6, 953.6, 954.5 | |
Bot for mirror arm on door, model 375.1, 970, 972, 974, 975, 976 | |||
7 | Remove mirror arm (5) with outside mirror (10) attached and wide-angle rearview mirror (15) | Pull electric wiring harness (1) of mirror electrical system through cutout in door frame. | |
Installation: Position rubber subsurface (14) below bottom mirror arm joint. | |||
8 | Remove cover (7) from outside mirror (10) | ||
9 | Disconnect electrical connector (8) from outside mirror (10) | ||
10 | Remove bolt (9) from outside mirror (10) | Bolt for clamping connection on outside mirror/wide-angle rearview mirror, model 374.5/6, 375.3/4, 940.1/2/3, 942.1/3, 943.1/3, 944, 950.5/6, 952.5/6, 953.6, 954.5 | |
Bolt for clamping connection for outside mirror, model 375.1, 970, 972, 974, 975, 976 | |||
11 | Remove outside rearview mirror (10) from mirror arm (5) | ||
12 | Remove cover from wide-angle rearview mirror (15) | ||
13 | Disconnect electrical connector from wide-angle rearview mirror (15) | ||
14 | Unscrew bolts from wide-angle rearview mirror (15) | Bolt for clamping connection on outside mirror/wide-angle rearview mirror, model 374.5/6, 375.3/4, 940.1/2/3, 942.1/3, 943.1/3, 944, 950.5/6, 952.5/6, 953.6, 954.5 | |
Bolt for clamping connection for outside mirror, model 375.1, 970, 972, 974, 975, 976 | |||
15 | Remove wide-angle rearview mirror (15) from mirror arm (5) | ||
16 | Remove bolt (12) | Bolt for curb mirror on door, model 374.5/6, 375.3/4, 940.1/2/3, 942.1/3, 943.1/3, 944, 950.5/6, 952.5/6, 953.6, 954.5 | |
Bolt for curb mirror on door, model 375.1, 970, 972, 974, 975, 976 | |||
17 | Remove curb mirror (13) | ||
18 | Install in the reverse order | ||
| Check | ||
19 | Check function of mirror heater |