Remove/install engine hood catch

AR88.40-P-3201MFA

Remove/install engine hood catch

20.03.2019

Model

118, 177, 247

1

Bolts

4

Limit switch

2

Electrical connector

5

Catch hook

3

Engine hood catch

 Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on safety-relevant components

AH00.00-Z-0019-01A

 

Remove/install

1

Open engine hood

2

Release and disconnect electrical connector (2)

3

Mark setting position of hood catch (3) and remove screws (1)

 Bolt, engine hood catch lower section to radiator crossmember

*BA88.40-P-1001-01F

4

Lift catch hooks (5) and remove limit switch (4)

5

Unhook cable from hood catch (3) and remove hood catch (3)

6

Install in the reverse order

 Engine hood

Number

Designation

Model 118, 177, 247

BA88.40-P-1001-01F

Bolt, engine hood catch lower section to radiator crossmember

Nm

12