AR88.40-D-3000NA | Removing and installing engine hood | 16.1.01 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6
MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODELS 690.6
D88.40-1101-06
1 Engine hood
2 Hood support
3 Fuse
4 Spring
5 Hinge
6 Collar nuts
| Removal: | ||
1 | Remove retainer (3) and hood support (2) with spring (4) from guide on engine hood (1). | Support engine hood (1) to prevent damage. Pay attention to installation position of spring (4). | |
2 | Unscrew collar nuts (6) from hinge (5) and remove engine hood (1) | ||
| Installation | ||
3 | Position engine hood (1) on hinges (5). | Only fit collar nuts (6), do not tighten | |
4 | Install spring (4), insert hood support (2) into guide on engine hood (1) and mount new retainer (3). | ||
5 | Adjust engine hood | ||
| |||
6 | Grease hinges (5). |
Engine hood