D88.30-1177-06
1 Screw
2 Shims
3 Hood support
4 Spring
5 Securing clamp
6 Pin
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Remove bolt (1) | Support engine hood. Otherwise the engine hood can damaged adjacent components or the engine hood () when falling down. | |
| |||
2 | Remove bolt (1) with washers (2) from hood support (3) | ||
3 | Release spring (4) | ||
4 | Remove securing clamp (5) | ||
5 | Remove pin (6) | ||
6 | Remove hood support (3) with spring (4). | ||
7 | Install in the reverse order |
Engine hood